Skip to content

2008 Kenworth T300 Recalls, Complaints & Specs

7 safety recalls list the 2008 Kenworth T300. Check your own VIN below.

7
safety recalls
0
owner complaints to NHTSA

7 safety recalls for the 2008 Kenworth T300

Most recent first. Recall repairs are free at any authorised dealer. Click a recall for the full defect, consequence and remedy text.

  1. Diesel (engine and engine cooling)

    NHTSA 09V348000 Reported 135 vehicles potentially affected PACCAR INCORPORATED

    Paccar is recalling model year 2008-2010 kenworth t300, t270, and t370, model year 2009-2010 t800 and peterbilt model year 2008-2010 335, 340, and 367 vehicles built on cummins' diesel engine. The vehicles may be designed with a hard wired, dash-mounted switch that enables the vehicle operator to inhibit aftertreatment diesel…

    Remedy: Paccar is working with cummins to repair the engines free of charge please see 09e-046. The safety recall began on october 1, 2009. Owners may contact cummins at 1-800-diesels (1-800-343-7357).

  2. Latch (latches/locks/linkages)

    NHTSA 08V065000 Reported 6,169 vehicles potentially affected PACCAR INCORPORATED

    Paccar is recalling 6,169 my 2008 kenworth t300, t660, t800, t2000, w900 and c500 vehicles and my 2008-2009 peterbilt models 365, 367, 384, 387, 388, 389 and 389 kits. Certain door latch assemblies on these vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 206, 'door locks and door retention…

    Remedy: Paccar is working with trimark and will inspect and replace the door latch if it is found to be defective. The recall began on march 14, 2008. Owners may contact kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4196.

  3. Hoses, lines/piping, and fittings (service brakes)

    NHTSA 08V002000 Reported 2,794 vehicles potentially affected PACCAR INCORPORATED

    Certain trucks equipped with eaton synflex eclipse brand extruded nylon air brake hose tubing fail to comply with the requirements of federal motor vehicle safety standard no. 106, "brake hoses." the tubing was manufactured with only four layers of nylon material, instead of the specified five layers.

    Remedy: Dealers will inspect the air brake hoses and, if necessary, replace the hoses. The recall began on february 22, 2008. Owner notification schedule for this campaign. Owners may contact kenworth at 1-425-828-5440 or…

  4. Electrical system

    NHTSA 07V213000 Reported 293 vehicles potentially affected PACCAR INCORPORATED

    On certain trucks equipped with cummins isc or paccar px8 engines, the jumper wire between the grid heater relay to the fuse block has been routed in such a way that the potential exists for it to rub against the radiator support.

    Remedy: Dealers will inspect the routing of the jumper wire. If the wire is not routed correctly, it will be inspected for rubbing or chaffing and replaced if necessary free of charge. The recall began on june 22, 2007. Owners…

  5. Axle assembly (power train)

    NHTSA 07V132000 Reported 245 vehicles potentially affected PACCAR INCORPORATED

    On certain trucks, the axle housings may have been manufactured with steel that was out of specification which could result in a fatigue failure over time.

    Remedy: Dealers will inspect and replace the axles free of charge. The recall began on may 9, 2007. Owners may contact kenworth at 425-828-5440 and peterbilt at 1-940-591-4196.

  6. Automatic transmission (power train)

    NHTSA 07V107000 Reported 4,592 vehicles potentially affected PACCAR INCORPORATED

    On certain trucks, the wiring, parts, or transmission programming required for the auto neutral feature to function as designed were either not installed, connected, or programmed properly.

    Remedy: Dealers will inspect the affected vehicles to ensure the auto neutral feature functions properly and, if needed, will make the necessary repairs free of charge. The recall began on may 9, 2007. Owners may contact…

  7. Service brakes, air

    NHTSA 07V073000 Reported 1,377 vehicles potentially affected PACCAR INCORPORATED

    Certain trucks fail to comply with the requirements of federal motor vehicle safety standard no. 121, "air brake systems." the trailer light line may have been routed using too tight of a bend radius. This routing method could cause the wires within the harness plug to be pulled away from the chassis plug resulting in an intermittent or…

    Remedy: Dealers will reroute the light line to eliminate the excessive bend radius and replace any plug or harness that has been damaged free of charge. The recall began on april 16, 2007. Owner may contact kenworth at…

No owner complaints on file

NHTSA has no owner complaints on file for the 2008 Kenworth T300. For context, the average model year in NHTSA's database has dozens; a zero can mean a reliable vehicle, a rare one, or both.

Compare Kenworth T300 model years

Recall and complaint counts for every Kenworth T300 model year in NHTSA's database.

Model yearRecallsComplaints
1996 Kenworth T30010
1997 Kenworth T30010
1998 Kenworth T30020
1999 Kenworth T30060
2000 Kenworth T30060
2001 Kenworth T30052
2002 Kenworth T30040
2003 Kenworth T30050
2004 Kenworth T30041
2005 Kenworth T30021
2006 Kenworth T30040
2007 Kenworth T30053
2008 Kenworth T30070
2009 Kenworth T30010
2010 Kenworth T30010

Checking a specific 2008 Kenworth T300

How do I know if my 2008 Kenworth T300 has an open recall?

Enter your 17-character VIN above. The VIN is on the driver's side dashboard (visible through the windshield), the driver's door jamb sticker, and your registration or insurance card. The check runs against NHTSA's live database and tells you which campaigns list your vehicle. 7 campaigns currently list the 2008 Kenworth T300; your car may already have been repaired under some of them.

Is the recall repair free?

Yes. Under federal law, manufacturers must fix safety recalls at no charge for vehicles up to 15 years old from the date of sale to the first owner. Contact any authorised Kenworth dealer with your VIN and the NHTSA campaign number (for example 07V073000).

What is the difference between a recall and a complaint?

A recall is a safety campaign filed by the manufacturer or ordered by NHTSA, with a defined defect and remedy. A complaint is a report an owner sent to NHTSA; it is not verified, but patterns of complaints are what trigger NHTSA investigations and, eventually, recalls.

Other Kenworth models

Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.