Skip to content

2010 Kenworth T800 Recalls, Complaints & Specs

11 safety recalls list the 2010 Kenworth T800, and owners have filed 1 complaint with NHTSA. Check your own VIN below.

11
safety recalls
1
owner complaint to NHTSA
0 / 1
complaints citing a crash / fire

11 safety recalls for the 2010 Kenworth T800

Most recent first. Recall repairs are free at any authorised dealer. Click a recall for the full defect, consequence and remedy text.

  1. Reservoir/tank (service brakes)

    NHTSA 24V145000 Reported 936 vehicles potentially affected PACCAR Incorporated

    PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an…

    Remedy: Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR…

  2. Electronic stability control (esc) and abs warning light (service brakes)

    NHTSA 20V199000 Reported 460,515 vehicles potentially affected PACCAR Incorporated

    PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery…

    Remedy: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners…

  3. Engine (engine and engine cooling)

    NHTSA 15V309000 Reported 4,823 vehicles potentially affected PACCAR Incorporated

    PACCAR Incorporated (PACCAR) is recalling certain model year 2010-2016 Kenworth T440, T800, and W900 trucks manufactured August 31, 2009, to April 20, 2015, and 2008-2015 Peterbilt 320, 337, 348, 365, 382, and 384 trucks manufactured July 27, 2007, to April 28, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive…

    Remedy: Cummins will notify owners on behalf of PACCAR, and Cummins service centers will administer the repairs which include securing the ends of the 90-degree elbow and reprogramming the electronic control module (ECM) with…

  4. Service brakes

    NHTSA 13V573000 Reported 18 vehicles potentially affected PACCAR Incorporated

    PACCAR is recalling certain model year 2007-2014 Kenworth T800 and W900 trucks manufactured March 22, 2006, through July 15, 2013 and equipped with Primaax tridem rear suspensions and a pusher and/or tag axle. The affected trucks have brake chambers that take longer to apply or release the brakes than the required time limit. Thus,…

    Remedy: PACCAR will notify owners, and dealers will modify the air brake system, free of charge. The recall began on January 15, 2014. Owners may contact PACCAR at 1-425-468-7400. Kenworth's recall number is 13KWL.

  5. Tank assembly (fuel system)

    NHTSA 11V127000 Reported 4,664 vehicles potentially affected PACCAR INCORPORATED

    Paccar is recalling certain model year 2008-2012 kenworth t2000, t660, t700, t800, and w900, as well as model year 2009-2012 peterbilt 365, 367, 384, 386, 387, 388, 389, and 587 trucks equipped with paccar mx engines. The oil module centrifugal spinner filter cap in the paccar mx engine may become loose, possibly allowing the cap to…

    Remedy: Dealers will re-torque the oil module filter cap and install a secondary retention device on the secondary centrifugal spinner filter cap. This service will be performed free of charge. The safety recall is expected to…

  6. Caliper (service brakes)

    NHTSA 10V535000 Reported 417 vehicles potentially affected PACCAR INCORPORATED

    Paccar is recalling certain model year kenworth t660, t700, t800 and w900 vehicles manufactured from december 22, 2008, through august 2, 2010, and equipped with ag400l air disc brakes. The air disc brake caliper could be installed on the wrong side of the drive axle potentially causing interference with the suspension bracket and the…

    Remedy: Dealers will verify the correct orientation of the brake caliper and perform the necessary repair free of charge. The safety recall began on november 24, 2010. Owners may contact kenworth at 425-828-5440.

  7. Column (steering)

    NHTSA 10V308000 Reported 9,697 vehicles potentially affected PACCAR INCORPORATED

    Paccar is recalling certain model year 2008-2010 trucks equipped with trw steering shafts. The circumferential weld around the steering shaft tube that welds the splined tube to the non-splined tube may be mislocated. Mislocation of the circumferential weld may allow the splined tube and non-splined tube to rotate relative to one…

    Remedy: Dealers will inspect the steering shaft using a weld placement gauge provided by trw. Any steering shaft found to have been welded improperly will be replaced free of charge. The safety recall began on july 30, 2010.…

  8. Spindle (suspension)

    NHTSA 10V185000 Reported 21 vehicles potentially affected PACCAR INCORPORATED

    Kenworth is recalling certain model year 2010 t2000, t660, t800 and w900 vehicles manufactured between july 30, 2009 and september 18, 2009. The rear axle outer end hub may have not been primed with oil properly during the rear axle installation process. Potential lack of oil may cause the outer end bearing to heat up and/or seize,…

    Remedy: Dealers will replace the bearings, seals and will add oil to the outer end hub as well as inspect races and axle housing for damage and replacing as necessary free of charge. The safety recall began on may 24, 2010.…

  9. Steering

    NHTSA 09V490000 Reported 3,078 vehicles potentially affected PACCAR INCORPORATED

    Kenworth is recalling model year 2010 t2000, t800, t660 and w900s trucks manufactured between july 1 and october 23, 2009. The fasteners attaching the steering gear to the front drive bracket may have received insufficient torque during the installation process resulting in less than required clamp load.

    Remedy: Dealers will inspect and re-torque the steering gear mounting bolts free of charge. The safety recall is expected to begin during january 2010. Owners may contact kenworth at 1-425-828-5440.

  10. Axle assembly (power train)

    NHTSA 09V415000 Reported 914 vehicles potentially affected PACCAR INCORPORATED

    Kenworth is recalling model year 2009 through 2010 t2000, t800, t660 and w900 trucks manufactured between november 12, 2008 and september 30, 2009. The axle u-bolts attaching the axle to the suspension leaf spring on certain ag400l rear suspensions may have received insufficient fastener torque during the installation process. The…

    Remedy: Dealers will inspect the axle u-bolts for visible defects, including bent and/or smashed threads and re-torque the axle u-bolts to factory specifications. The recall began on november 4, 2009. Owners may contact…

  11. Diesel (engine and engine cooling)

    NHTSA 09V348000 Reported 135 vehicles potentially affected PACCAR INCORPORATED

    Paccar is recalling model year 2008-2010 kenworth t300, t270, and t370, model year 2009-2010 t800 and peterbilt model year 2008-2010 335, 340, and 367 vehicles built on cummins' diesel engine. The vehicles may be designed with a hard wired, dash-mounted switch that enables the vehicle operator to inhibit aftertreatment diesel…

    Remedy: Paccar is working with cummins to repair the engines free of charge please see 09e-046. The safety recall began on october 1, 2009. Owners may contact cummins at 1-800-diesels (1-800-343-7357).

1 owner complaint filed with NHTSA

Owners of the 2010 Kenworth T800 have filed 1 complaint with NHTSA; 1 describe a fire. Complaints peaked in 2016 with 1 filed that year.

Most-reported components

What owners are reporting

“Tru-flex torsional bellows pipe connecting engine turbo charger and exhaust pipe in engine compartment leaks hot exhaust gases into cab where operator is located. Hot exhaust gases escape from this fr”

Owner complaint to NHTSA, December 10, 2016 · Unknown or other

Compare Kenworth T800 model years

Recall and complaint counts for every Kenworth T800 model year in NHTSA's database.

Model yearRecallsComplaints
1987 Kenworth T80020
1988 Kenworth T80020
1989 Kenworth T80030
1990 Kenworth T80030
1991 Kenworth T80040
1992 Kenworth T80010
1993 Kenworth T80010
1994 Kenworth T80032
1995 Kenworth T80052
1996 Kenworth T80081
1997 Kenworth T80091
1998 Kenworth T80081
1999 Kenworth T800124
2000 Kenworth T800101
2001 Kenworth T800101
2002 Kenworth T80060
2003 Kenworth T80071
2004 Kenworth T800123
2005 Kenworth T800123
2006 Kenworth T800134
2007 Kenworth T800201
2008 Kenworth T800251
2009 Kenworth T800192
2010 Kenworth T800111
2011 Kenworth T800131
2012 Kenworth T800101
2013 Kenworth T80080
2014 Kenworth T800120
2015 Kenworth T800120
2016 Kenworth T800121
2017 Kenworth T80080
2018 Kenworth T800111
2019 Kenworth T80080
2020 Kenworth T80090
2021 Kenworth T80010
2022 Kenworth T80010
2023 Kenworth T80010
2024 Kenworth T80040
2025 Kenworth T80010

Checking a specific 2010 Kenworth T800

How do I know if my 2010 Kenworth T800 has an open recall?

Enter your 17-character VIN above. The VIN is on the driver's side dashboard (visible through the windshield), the driver's door jamb sticker, and your registration or insurance card. The check runs against NHTSA's live database and tells you which campaigns list your vehicle. 11 campaigns currently list the 2010 Kenworth T800; your car may already have been repaired under some of them.

Is the recall repair free?

Yes. Under federal law, manufacturers must fix safety recalls at no charge for vehicles up to 15 years old from the date of sale to the first owner. Contact any authorised Kenworth dealer with your VIN and the NHTSA campaign number (for example 09V348000).

What is the difference between a recall and a complaint?

A recall is a safety campaign filed by the manufacturer or ordered by NHTSA, with a defined defect and remedy. A complaint is a report an owner sent to NHTSA; it is not verified, but patterns of complaints are what trigger NHTSA investigations and, eventually, recalls.

Other Kenworth models

Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.