2001 Kenworth T2000 Recalls, Complaints & Specs
5 safety recalls list the 2001 Kenworth T2000, and owners have filed 1 complaint with NHTSA. Check your own VIN below.
5 safety recalls for the 2001 Kenworth T2000
Most recent first. Recall repairs are free at any authorised dealer. Click a recall for the full defect, consequence and remedy text.
-
Unknown or other
On certain heavy duty trucks equipped with vertical tail pipes, the frame access grabhandle is mounted too high.
Remedy: Dealers will inspect the grabhandle location and if determined to be mounted too high, the handle will be relocated to the proper height. Owner notification began july 29, 2003. Owners should contact kenworth at…
-
Fifth wheel assembly (trailer hitches)
On certain trucks equipped with jost international jsk 37u series fifth wheels, a fatigue crack can develop in the bracket pin weld under certain loading conditions.
Remedy: Dealers will replace the bracket pins and repair instructions free of charge. Peterbilt's owner notification began june 20, 2003. Kenworth's owner notification began june 12, 2003. Owners who take their vehicles to an…
-
Hub (suspension)
On certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.
Remedy: Dealers will replace all front axle hubs. Notification began july 16, 2003. The manufacturer has advised us that parts will not be available until september 2003. Owners who take their vehicles to an authorized dealer…
-
Universal joint (power train)
Vehicle description: heavy duty trucks. The driveline u-joint fasteners at the output yoke of the transmission were improperly tightened.
Remedy: Dealers will tighten the driveline fasteners to the proper specification. Owner notification began november 26, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not…
-
Suspension: lower arm
Vehicle description: vehicles equipped with 54" rear axle spacing configuration of the airglide 200 suspension with the service application identified as logger, dump truck, or tanker. The rear suspension is regularly subjected to extreme articulation, resulting in flexing of the joint.
Remedy: Dealers will replace the lower sway arm brackets. Owner notification began march 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within…
1 owner complaint filed with NHTSA
Owners of the 2001 Kenworth T2000 have filed 1 complaint with NHTSA. Complaints peaked in 2011 with 1 filed that year.
Most-reported components
What owners are reporting
“Brake cam brackets on rear axle broke due to poor welding. *tr”
Owner complaint to NHTSA, October 15, 2011 · Service brakes, hydraulic
Compare Kenworth T2000 model years
Recall and complaint counts for every Kenworth T2000 model year in NHTSA's database.
| Model year | Recalls | Complaints |
|---|---|---|
| 1995 Kenworth T2000 | 1 | 0 |
| 1996 Kenworth T2000 | 3 | 0 |
| 1997 Kenworth T2000 | 4 | 3 |
| 1998 Kenworth T2000 | 4 | 3 |
| 1999 Kenworth T2000 | 8 | 2 |
| 2000 Kenworth T2000 | 6 | 2 |
| 2001 Kenworth T2000 | 5 | 1 |
| 2002 Kenworth T2000 | 3 | 1 |
| 2003 Kenworth T2000 | 5 | 2 |
| 2004 Kenworth T2000 | 7 | 3 |
| 2005 Kenworth T2000 | 7 | 0 |
| 2006 Kenworth T2000 | 7 | 7 |
| 2007 Kenworth T2000 | 11 | 12 |
| 2008 Kenworth T2000 | 14 | 2 |
| 2009 Kenworth T2000 | 12 | 0 |
| 2010 Kenworth T2000 | 6 | 0 |
| 2011 Kenworth T2000 | 2 | 0 |
| 2012 Kenworth T2000 | 1 | 0 |
Checking a specific 2001 Kenworth T2000
How do I know if my 2001 Kenworth T2000 has an open recall?
Enter your 17-character VIN above. The VIN is on the driver's side dashboard (visible through the windshield), the driver's door jamb sticker, and your registration or insurance card. The check runs against NHTSA's live database and tells you which campaigns list your vehicle. 5 campaigns currently list the 2001 Kenworth T2000; your car may already have been repaired under some of them.
Is the recall repair free?
Yes. Under federal law, manufacturers must fix safety recalls at no charge for vehicles up to 15 years old from the date of sale to the first owner. Contact any authorised Kenworth dealer with your VIN and the NHTSA campaign number (for example 01V051000).
What is the difference between a recall and a complaint?
A recall is a safety campaign filed by the manufacturer or ordered by NHTSA, with a defined defect and remedy. A complaint is a report an owner sent to NHTSA; it is not verified, but patterns of complaints are what trigger NHTSA investigations and, eventually, recalls.
Other Kenworth models
- T68077 complaints
- T80033 complaints
- W90032 complaints
- Kenworth23 complaints
- T60016 complaints
- Conventional10 complaints
- T88010 complaints
- T3007 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.