RecallMyCar

2000 Kenworth C500 Recalls, Complaints & Specs

7 safety recalls list the 2000 Kenworth C500. Check your own VIN below.

7
safety recalls
0
owner complaints to NHTSA

7 safety recalls for the 2000 Kenworth C500

Most recent first. Recall repairs are free at any authorised dealer. Click a recall for the full defect, consequence and remedy text.

  1. Service brakes, air

    NHTSA 03V126000 Reported 45 vehicles potentially affected PACCAR INCORPORATED

    Certain trucks equipped with meritor p 18x7 brakes with 36" brake chambers fail to comply with the requirements of federal motor vehicle safety standard (FMVSS) no. 121, "air brake systems." these trucks were manufactured with a combined air reservoir volume less than 12 times the combined volume of all service brake chambers.

    Remedy: Dealers will add an additional tank or change one of the existing air tanks to a larger size. Owner notification began on may 5, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service…

  2. Tie rod assembly (steering)

    NHTSA 02V037003 Reported 4,513 vehicles potentially affected PACCAR, INCORPORATED

    Heavy duty trucks equipped with trw tie rod ends on certain arvinmeritor and dana axles. Peterbilt will recall 1,434 vehicles equipped with arvinmeritor axles manufactured from december 11, 1999, to may 14, 2000, and from july 22 to september 30, 2000. Kenworth will recall 859 vehicles equipped with arvinmeritor vehicles manufactured…

    Remedy: Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began july 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon…

  3. Electrical system: wiring

    NHTSA 02V033000 Reported 44 vehicles potentially affected PACCAR, INCORPORATED

    On some heavy duty trucks equipped with alcoa fujikura ltd. (afl) power distribution boxes (pd box), the pd boxes were manufactured with insufficient torque applied to the nut of the main power feed-through stud.

    Remedy: Dealers will inspect and tighten the nut on the main power feed-through stud. Owner notification began february 25, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not…

  4. Tie rod assembly (steering)

    NHTSA 01V140006 Reported 2,294 vehicles potentially affected PACCAR, INCORPORATED

    Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.

    Remedy: Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began october 24, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon…

  5. Suspension

    NHTSA 01V167001 Reported 390 vehicles potentially affected PACCAR, INCORPORATED

    Vehicle description: heavy duty trucks equipped with chalmers 1000 series and 800 series suspension kits. These suspension kits may have insufficient penetration of the weld attaching the torque rod eye to the torque rod tube.

    Remedy: Dealers will replace all chalmers fixed torque rods on these vehicles. Owner notification began july 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive…

  6. Suspension: lower arm

    NHTSA 01V051000 Reported 209 vehicles potentially affected PACCAR, INCORPORATED

    Vehicle description: vehicles equipped with 54" rear axle spacing configuration of the airglide 200 suspension with the service application identified as logger, dump truck, or tanker. The rear suspension is regularly subjected to extreme articulation, resulting in flexing of the joint.

    Remedy: Dealers will replace the lower sway arm brackets. Owner notification began march 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within…

  7. Fuses and circuit breakers (electrical system)

    NHTSA 01V021000 Reported 1,992 vehicles potentially affected PACCAR, INCORPORATED

    Vehicle description: heavy duty trucks equipped with an optional firewall-mounted circuit breaker. The main cab power and battery power leads were attached incorrectly. This condition can result in the main cab power being unprotected.

    Remedy: Dealers will inspect and correct the problem, as needed. Owner notification began february 26, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free…

No owner complaints on file

NHTSA has no owner complaints on file for the 2000 Kenworth C500. For context, the average model year in NHTSA's database has dozens; a zero can mean a reliable vehicle, a rare one, or both.

Compare Kenworth C500 model years

Recall and complaint counts for every Kenworth C500 model year in NHTSA's database.

Model yearRecallsComplaints
1975 Kenworth C50020
1976 Kenworth C50020
1977 Kenworth C50020
1978 Kenworth C50020
1979 Kenworth C50010
1980 Kenworth C50010
1981 Kenworth C50010
1989 Kenworth C50010
1990 Kenworth C50010
1991 Kenworth C50030
1992 Kenworth C50010
1993 Kenworth C50010
1994 Kenworth C50010
1995 Kenworth C50010
1996 Kenworth C50040
1997 Kenworth C50030
1998 Kenworth C50030
1999 Kenworth C50071
2000 Kenworth C50070
2001 Kenworth C50040
2002 Kenworth C50020
2003 Kenworth C50030
2004 Kenworth C50040
2005 Kenworth C50050
2006 Kenworth C50051
2007 Kenworth C50061
2008 Kenworth C50090
2009 Kenworth C50050
2010 Kenworth C50041
2011 Kenworth C50060
2012 Kenworth C50031
2013 Kenworth C50020
2014 Kenworth C50040
2015 Kenworth C50030
2016 Kenworth C50030
2017 Kenworth C50040
2018 Kenworth C50050
2019 Kenworth C50040
2020 Kenworth C50010
2021 Kenworth C50010
2022 Kenworth C50010
2023 Kenworth C50010
2025 Kenworth C50010

Checking a specific 2000 Kenworth C500

How do I know if my 2000 Kenworth C500 has an open recall?

Enter your 17-character VIN above. The VIN is on the driver's side dashboard (visible through the windshield), the driver's door jamb sticker, and your registration or insurance card. The check runs against NHTSA's live database and tells you which campaigns list your vehicle. 7 campaigns currently list the 2000 Kenworth C500; your car may already have been repaired under some of them.

Is the recall repair free?

Yes. Under federal law, manufacturers must fix safety recalls at no charge for vehicles up to 15 years old from the date of sale to the first owner. Contact any authorised Kenworth dealer with your VIN and the NHTSA campaign number (for example 01V021000).

What is the difference between a recall and a complaint?

A recall is a safety campaign filed by the manufacturer or ordered by NHTSA, with a defined defect and remedy. A complaint is a report an owner sent to NHTSA; it is not verified, but patterns of complaints are what trigger NHTSA investigations and, eventually, recalls.

Other Kenworth models

Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.