White GMC Wca Recalls & Complaints by Model Year
NHTSA lists 8 safety recalls and 3 owner complaints across 13 model years of the White GMC Wca (1986–1998). The most-complained-about year is 1994.
Pick your White GMC Wca model year
| Model year | Recalls | Complaints |
|---|---|---|
| 1998 White GMC Wca | 1 | 0 |
| 1997 White GMC Wca | 1 | 0 |
| 1996 White GMC Wca | 2 | 0 |
| 1995 White GMC Wca | 3 | 0 |
| 1994 White GMC Wca | 3 | 2 |
| 1993 White GMC Wca | 2 | 1 |
| 1992 White GMC Wca | 1 | 0 |
| 1991 White GMC Wca | 2 | 0 |
| 1990 White GMC Wca | 2 | 0 |
| 1989 White GMC Wca | 2 | 0 |
| 1988 White GMC Wca | 4 | 0 |
| 1987 White GMC Wca | 1 | 0 |
| 1986 White GMC Wca | 1 | 0 |
What White GMC Wca owners complain about
Across all model years, owners have filed 3 complaints with NHTSA. The 1994 model year has the most, with 2.
All White GMC Wca recalls (8)
Every NHTSA safety campaign that lists a White GMC Wca, most recent first, with the model years each one covers.
-
Lines and fittings (suspension)
Vehicle description: class 8 heavy duty trucks. The air suspension control valve supply line was not plumbed through an air pressure protection valve. In the event of a failure, there would be loss of air pressure in the 'b' system air reservoir that supplies air pressure for the front steer axle brakes.
Remedy: Dealers will install the necessary air pressure protection valve.
Model years: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
-
Service brakes, air
The traction solenoid exhaust can be obstructed due to inadequate drainage and a build-up of road contamination between the mounting bracket and the solenoid housing. The obstructed exhaust prevents the relay valve control air pressure from venting after a differential braking traction event.
Remedy: Dealers will remove the suspect valve and install a new valve that has a modified solenoid housing which will allow for sufficient drainage and a new valve mounting bracket with increased height to reduce entry of…
-
Air suspension system (suspension)
The rear suspension axle retention plate can break under normal use, affecting axle alignment.
Remedy: Dealers will remove and replace the axle retention clip plates on affected vehicles.
Model years: 1995
-
Steering wheel/handle bar (steering)
The brackets that attach the steering column assembly to the cab structure cracks at the "v" notch in the bracket.
Remedy: Volvo GM will replace the suspect brackets with a newly designed bracket.
Model years: 1993, 1994
-
Linkages (steering)
The pinch bolt used to retain the pitman arm to the steering gear may not meet the heat treat specification for a grade 8 fastener and may strip before proper torque is achieved.
Remedy: Replace the pinch bolts with properly heat treated bolts.
Model years: 1991
-
Air (parking brake)
The bendix mv-2 parking control valve installed in vehicles without a desiccant style air dryer may experience a seal failure. This failure may allow the valve to move from the park position to the release position, allowing the parking brakes to release.
Remedy: Rebuild the bendix mv-2 parking control valve.
Model years: 1988, 1989, 1990
-
Electrical system: wiring
Grounding of the AC power source may be defective (or there may be no electrical grounding at the AC power source).
Remedy: Rewire engine block heater to assure proper grounding.
Model years: 1988
-
Multiple axle (suspension)
Axle seat used on rear axle may be too hard (brittle) and could crack.
Remedy: Replace suspect axle seat.
Model years: 1988
Other White GMC models
- White GMC4 complaints
- Aero1 complaints
- Acl0 complaints
- ACL42B0 complaints
- Aclf0 complaints
- Aclff0 complaints
- Aclft0 complaints
- Acm0 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.