International Harvester 1723 Recalls & Complaints by Model Year
NHTSA lists 4 safety recalls and 0 owner complaints across 14 model years of the International Harvester 1723 (1978–1992).
Pick your International Harvester 1723 model year
| Model year | Recalls | Complaints |
|---|---|---|
| 1992 International Harvester 1723 | 2 | 0 |
| 1991 International Harvester 1723 | 2 | 0 |
| 1989 International Harvester 1723 | 2 | 0 |
| 1988 International Harvester 1723 | 2 | 0 |
| 1987 International Harvester 1723 | 3 | 0 |
| 1986 International Harvester 1723 | 3 | 0 |
| 1985 International Harvester 1723 | 3 | 0 |
| 1984 International Harvester 1723 | 3 | 0 |
| 1983 International Harvester 1723 | 3 | 0 |
| 1982 International Harvester 1723 | 4 | 0 |
| 1981 International Harvester 1723 | 3 | 0 |
| 1980 International Harvester 1723 | 2 | 0 |
| 1979 International Harvester 1723 | 2 | 0 |
| 1978 International Harvester 1723 | 1 | 0 |
All International Harvester 1723 recalls (4)
Every NHTSA safety campaign that lists a International Harvester 1723, most recent first, with the model years each one covers.
-
Switch (exterior lighting)
These buses have a turn signal lever that will not operate consistently in the lane change mode if the lever is not moved to the position where resistance to movement is felt.
Remedy: Operators will be mailed information concerning the proper method of using turn signals. A decal will also be provided to be placed on the instrument panel of each bus.
Model years: 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1991, 1992
-
Suspension: rear
The axle housings were manufactured with a tight friction weld curl radius on the inside diameter of the axle housing. Under operational loads, cracks can initiate at the weld curl radius on the inside of the housing. These cracks may propagate, eventually allowing the axle spindle to separate from the axle housing.
Remedy: Dealers will replace the rear axle housing with a new housing.
Model years: 1982
-
Shaft pitman (steering)
The saginaw gear does not relieve pressure when the wheels have been turned fully against the axle stops. The resulting continued pressure on the steering system can result in the development of cracks in the splines of the pitman shaft, which can develop into a complete fracture of the pitman shaft.
Remedy: Replace the existing pitman shaft in the steering gear assembly with a new, strengthened pitman shaft.
Model years: 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987
-
Tank assembly (fuel system)
The fuel system failed the crash barrier test.
Remedy: Modify the fuel tank cage to comply with FMVSS 301.
Model years: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1991, 1992
Other International Harvester models
- School Bus42 complaints
- 380041 complaints
- 470040 complaints
- 490021 complaints
- International Harvester11 complaints
- Conventional10 complaints
- 94008 complaints
- 93007 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.