Peterbilt 330 Recalls & Complaints by Model Year
NHTSA lists 34 safety recalls and 3 owner complaints across 25 model years of the Peterbilt 330 (1996–2023). The most-complained-about year is 1999.
Pick your Peterbilt 330 model year
- 1996
- 1997
- 1998
- 1999
- 2000
- 2001
- 2002
- 2003
- 2004
- 2007
- 2008
- 2009
- 2010
- 2011
- 2012
- 2013
- 2014
- 2015
- 2016
- 2017
- 2018
- 2019
- 2020
- 2022
- 2023
What Peterbilt 330 owners complain about
Across all model years, owners have filed 3 complaints with NHTSA. The 1999 model year has the most, with 1.
All Peterbilt 330 recalls (34)
Every NHTSA safety campaign that lists a Peterbilt 330, most recent first, with the model years each one covers.
-
Steering
PACCAR Incorporated (PACCAR) is recalling certain 2022-2023 Kenworth T170, T270, T280, T370, T380, T440, T470, T480, T680, T800, T880, W900, W990, C500, and 2022-2023 Peterbilt 325, 330, 337, 348, 365, 367, 389, 520, 536, 537, 548, 567, and 579 vehicles. The steering gears may have been assembled incorrectly, which can cause the gears…
Remedy: Dealers will inspect the steering gear serial numbers, and replace the steering gears as necessary, free of charge. Owner notification letters were mailed September 26, 2022. Owners may contact Kenworth's customer…
-
Critical fasteners (steering)
PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.
Remedy: Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer…
-
Electronic stability control (esc) and abs warning light (service brakes)
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery…
Remedy: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners…
Model years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
-
Tie rod assembly (steering) and steering
PACCAR Incorporated (PACCAR) is recalling certain 2016 Peterbilt 220, 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 389, 389G, 567, 579 and 587 trucks and Kenworth K170, T170, T270, T370, T440, T470,T660, T680, T800, T880, and W900 trucks equipped with certain Spicer D or E series steer axles. The castellated nut on the steer axles…
Remedy: PACCAR will notify owners, and dealers will inspect the torque of the castellated nut and tie rod, tightening it as necessary. If the tie rod stud and knuckle on units cannot be sufficiently torqued, the dealer will…
Model years: 2016
-
Switch (exterior lighting)
PACCAR Incorporated (PACCAR) is recalling certain model year 2017 Peterbilt 325, 330, 337, 348, 365, 367, 386, 389, and 587 vehicles manufactured April 20, 2016, to June 13, 2016. The brake lights may not illuminate when the brakes are applied. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety…
Remedy: PACCAR will notify owners, and dealers will inspect and replace any brake light switches with date code 08-01760, free of charge. The recall began on January 26, 2017. Owners may contact Peterbilt customer service at…
Model years: 2017
-
Tires
PACCAR Incorporated (PACCAR) is recalling certain model year 2017 Kenworth K370, T270, T370, T440, T660, T800 trucks manufactured February 2, 2016, to October 13, 2016, and Peterbilt 330, 337, 348, 367, 389, 567, and 579 trucks manufactured March 7, 2016, to October 5, 2016. The affected vehicles are equipped with certain Goodyear LHS…
Remedy: Goodyear will notify the owners of the affected Peterbilt and Kenworth vehicles and Goodyear dealers will replace the affected tires, free of charge. The recall began on December 14, 2016. To find a Goodyear dealer,…
Model years: 2017
-
Fuel system, diesel
PACCAR Incorporated (PACCAR) is recalling certain model year 2015 Kenworth K270, T270, K370, T370, T440, T470, and W900 chassis manufactured May 13, 2014, to July 23, 2014, and certain model year 2015 Peterbilt 210, 220, 320, 325, 330, 337, 348, 365, 382, 384, and 567 chassis manufactured May 8, 2014, to July 22, 2014. The Cummins ISB…
Remedy: Cummins will notify owners on behalf of PACCAR, and Cummins dealers will replace the fuel filter with a non-defective one, free of charge. The notification schedule for this recall ran July 29 to December 31, 2014.…
Model years: 2015
-
Seat belts
PACCAR Incorporated (PACCAR) is recalling certain model year 2014 Kenworth T660, T680, T700,T800, T880, W900, T440, T470, T370, T270, T170, C500, and C550 chassis manufactured between August 7, 2013, and October 31, 2013, and Peterbilt 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, and 587 chassis manufactured between…
Remedy: PACCAR will notify owners, and dealers will inspect and replace the seat belt buckles, as necessary, free of charge. The recall began on March 31, 2014. Owners may contact PACCAR at 1-425-468-7400. Kenworth's number…
Model years: 2014
-
Switch (electrical system)
PACCAR is recalling certain model year 2014 Kenworth T170, T270, T370, T470, T660, T680, T800, T880, and W900 trucks manufactured May 6, 2013, through May 17, 2013; and model year 2014 Peterbilt 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, 389K, 567, 579 and 587 trucks manufactured May 1, 2013 through May 17, 2013. An internal…
Remedy: PACCAR will notify owners, and dealers will replace affected ignition switches, free of charge. The recall began on June 14, 2013. Owners may contact Kenworth at 1-425-828-5000 or Peterbilt at 1-940-591-4000.…
Model years: 2014
-
Check valve (service brakes)
Paccar is recalling certain model year 2012-2013 kenworth t170, t270, t370, t440, t470, t660, t700, t800, w900, and peterbilt 320, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, and 587 vehicles, manufactured from january 31, 2011, through january 19, 2012, and equipped with bendix atr-6 antilock traction relay valves. In extremely…
Remedy: Paccar will notify owners, and provide a temporary repair until bendix develops a permanent remedy. This service will be performed free of charge. The safety recall began on february 10, 2012. Owner may contact…
-
Tank assembly (fuel system)
Paccar is recalling certain model year 2008-2012 kenworth t2000, t660, t700, t800, and w900, as well as model year 2009-2012 peterbilt 365, 367, 384, 386, 387, 388, 389, and 587 trucks equipped with paccar mx engines. The oil module centrifugal spinner filter cap in the paccar mx engine may become loose, possibly allowing the cap to…
Remedy: Dealers will re-torque the oil module filter cap and install a secondary retention device on the secondary centrifugal spinner filter cap. This service will be performed free of charge. The safety recall is expected to…
Model years: 2012
-
Abs warning light (service brakes)
Peterbilt is recalling certain model year 2010 and 2011 model 325, 330, 335, 337, 340, and 348 trucks for failing to comply with the requirements of federal motor vehicle safety standard no. 121, "air brake systems." the ABS malfunction indicator lamp may be illuminated at all times.
Remedy: Dealers will re-pin the hydraulic brake harness insuring a normally closed diagnostic switch is installed. This service will be performed free of charge. The safety recall began on june 16, 2010. Owners may contact…
Model years: 2011
-
Latch (latches/locks/linkages)
Peterbilt is recalling certain model year 2010 and 2011 model 325, 330, 335, 337, 340, and 348 trucks. The hood anti-blowdown device is designed to prevent unintended and unexpected hood closure. The device within can become hindered or inoperative due to unintentional latch movement which interferes with the hood pivot j-hook, latch…
Remedy: Dealers will install hood anti-blowdown retention cables to the radiator and hood assemblies free of charge. The safety recall began on june 21, 2010. Owners may contact perterbilt at 940-591-4196.
-
Air (parking brake)
Paccar is recalling 1,043 my 2008-2009 kenworth c500, t2000,t660, t800 and w900 trucks equipped with bendix mv-3 dash control valves. The molded valve body has an incorrect core pin in the injection mold causing the valve body to be oversized in the double check valve area. This condition can allow the rubber double check valve to…
Remedy: Dealers will replace the bendix mv-3 dash control valves free of charge. The recall began on april 14, 2008. Owners may contact kenworth at 1-425-828-4196.
Model years: 2009
-
Trailer hitches
Paccar is recalling 318 my 2007-2009 kenworth t800, w900, and peterbilt 357, 365, 367, 378, 379, 384, 385, 386,388, and 389 trucks equipped with premier trailer hitch assemblies. The pintle hitch assemblies may have been manufactured in a manner resulting in a reduction of fatigue strength of the pivot pins.
Remedy: Dealers will replace the potentially defective pivot pin free of charge. The recall began on april 18, 2008. Owners may contact kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4196.
Model years: 2009
-
Latch (latches/locks/linkages)
Paccar is recalling 6,169 my 2008 kenworth t300, t660, t800, t2000, w900 and c500 vehicles and my 2008-2009 peterbilt models 365, 367, 384, 387, 388, 389 and 389 kits. Certain door latch assemblies on these vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 206, 'door locks and door retention…
Remedy: Paccar is working with trimark and will inspect and replace the door latch if it is found to be defective. The recall began on march 14, 2008. Owners may contact kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4196.
Model years: 2009
-
Hoses, lines/piping, and fittings (service brakes)
Certain trucks equipped with eaton synflex eclipse brand extruded nylon air brake hose tubing fail to comply with the requirements of federal motor vehicle safety standard no. 106, "brake hoses." the tubing was manufactured with only four layers of nylon material, instead of the specified five layers.
Remedy: Dealers will inspect the air brake hoses and, if necessary, replace the hoses. The recall began on february 22, 2008. Owner notification schedule for this campaign. Owners may contact kenworth at 1-425-828-5440 or…
Model years: 2008
-
Suspension
On some peterbilt trucks, certain parts used in the air suspensions have a high copper content causing premature failure.
Remedy: Dealers will inspect and, when necessary, replace the defective parts. The recall began on january 17, 2007. Owners may contact peterbilt at 1-940-591-4196.
-
Engine and engine cooling
On certain trucks built with cummins isc and isl engines, plugs were assembled incorrectly creating stress and cracks which could cause an oil leak.
Remedy: Cummins will notify owners and arrange for installation of a steel cup plug boss cap. Owners should contact cummins at 1-800-343-7357.
Model years: 2004
-
Arm (steering)
On certain trucks equipped with dana spicer integral knuckle and steer arm assemblies, the steer axle assemblies may have a longitudinal crack in the steer arm.
Remedy: Dealers will inspect and replace the knuckle and steer arm assemblies. Owner notification began january 5, 2004. Owners should contact kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4201.
Model years: 2003
-
Fan (engine and engine cooling)
On certain trucks equipped with caterpillar c7 or 3126e 2002 engines and horton fan hubs, the fan hub mounting bolts can fail resulting in the hub and fan assembly separating from the engine. This loss of clamp load causes unwanted vibration in the assembly that leads to bolt failure.
Remedy: Dealers will add a rigid spacer across the two lower mounting holes of the fan hub to maintain the clamping force and replace all the bolts and washers. Owner notification began october 22, 2003. Owners should contact…
-
Axle hubs (power train)
On certain heavy duty trucks, the locking tab that locks the outer spindle nut onto the spindle was not engaged or properly bent over.
Remedy: Dealers will inspect the hubs to determine if the locking tabs are properly bent. If the locking tabs are not bent, then dealers will inspect the appropriate components for premature wear and replace such components as…
Model years: 2003
-
Fuel pump (fuel system)
On certain trucks equipped with caterpillar 3126e hydraulically controlled electronically actuated unit injected diesel engines with high efficiency pumps (hep8). The pump components may experience a high pressure seal failure which can result in a short period of rough running and subsequent engine stall due to a loss of injection…
Remedy: Caterpillar is conducting the owner notification and remedy for this campaign. Dealers will inspect the pump serial numbers and replace the pump if necessary. Owners who take their vehicles to an authorized dealer on…
Model years: 2002
-
Hand control/valve (service brakes)
On certain vehicles equipped with bendix tc-7 trailer control hand-operated valve with push-to-connect fittings. The delivery port in the valve body may be partially blocked due to a problem during the molding process.
Remedy: Paccar will notify its customers and inspect and replace, if necessary, the hand valve free of charge. Owner notification began october 18, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon…
Model years: 2002
-
Tie rod assembly (steering)
Heavy duty trucks equipped with trw tie rod ends on certain arvinmeritor and dana axles. Peterbilt will recall 1,434 vehicles equipped with arvinmeritor axles manufactured from december 11, 1999, to may 14, 2000, and from july 22 to september 30, 2000. Kenworth will recall 859 vehicles equipped with arvinmeritor vehicles manufactured…
Remedy: Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began july 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon…
-
Check valve (service brakes)
On certain heavy duty trucks equipped with meritor wabco pneumatic anitlock brake system (ABS) valve packages, the assembly bolts on these valve packages were not tightened correctly.
Remedy: Dealers will tighten the fasteners to the proper specification. Owner notification began february 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the…
Model years: 2001
-
Tie rod assembly (steering)
Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Remedy: Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began october 24, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon…
-
Latch (latches/locks/linkages)
Vehicle description: heavy duty trucks. A change in the internal linkage of certain cab doors has created a possible binding condition.
Remedy: Dealers will modify the door linkage to correct the potential of binding. Owner notification began june 22, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive…
-
Electrical system: front underhood
Vehicle description: heavy duty trucks equipped with cummins isc engines. Diodes (electronic devices that restrict current flow) contained in the pre-heat circuit of certain engine wiring harnesses were not properly insulated during the harness manufacturing process.
Remedy: Dealers will inspect the harnesses and remedy, if required, by properly insulating the diodes. Owner notification began june 22, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service…
Model years: 2001
-
Suspension
Vehicle description: heavy duty trucks equipped with chalmers 1000 series and 800 series suspension kits. These suspension kits may have insufficient penetration of the weld attaching the torque rod eye to the torque rod tube.
Remedy: Dealers will replace all chalmers fixed torque rods on these vehicles. Owner notification began july 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive…
Model years: 2000
-
Tie rod assembly (steering)
Vehicle description: heavy duty trucks equipped with tie rod assemblies manufactured by trw. The suspect tie rods contain 24-dl model ball sockets. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.
Remedy: Dealers will replace the defective ball sockets and/or drag links. Owner notification began on april 10, 2001, to kenworth owners and on april 25, 2001, to peterbilt owners. Owners who take their vehicles to an…
Model years: 1999
-
Anchorage (seat belts)
Vehicle description: class 7 and class 8 vehicles. These vehicles do not comply with the requirements of FMVSS no. 207, "seating system," and no. 210, "seat belt assembly anchorages." some fasteners used to attach the shoulder belt anchor bracket to the cab structure were omitted during production.
Remedy: Dealers will add the necessary fasteners. Owner notification began march 19, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a…
-
Tie rod assembly (steering)
Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Remedy: Dealers will remove and replace all affected tie rods and drag links with different designed ends.
Model years: 1999
-
Automatic transmission (power train)
Vehicle description: heavy duty trucks equipped with eaton autoshift gen ii transmission assemblies. Due to a software problem in the transmission assemblies, the transmission will select the wrong gear.
Remedy: Dealers will replace the autoshift transmissions. Eaton performed the campaign for the kenworth portion. However peterbilt will be conducting their own campaign.
Model years: 2000
Other Peterbilt models
- 37960 complaints
- 57942 complaints
- Peterbilt36 complaints
- 38923 complaints
- 38821 complaints
- 35719 complaints
- 38612 complaints
- 38711 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.