Skip to content

1997 International Harvester 9200 Recalls, Complaints & Specs

5 safety recalls list the 1997 International Harvester 9200, and owners have filed 1 complaint with NHTSA. Check your own VIN below.

5
safety recalls
1
owner complaint to NHTSA
1 / 0
complaints citing a crash / fire

5 safety recalls for the 1997 International Harvester 9200

Most recent first. Recall repairs are free at any authorised dealer. Click a recall for the full defect, consequence and remedy text.

  1. Recreational vehicle/trailer (equipment)

    NHTSA 04V100000 Reported 83,312 vehicles potentially affected INTERNATIONAL TRUCK & ENGINE CORPORATION

    On certain conventional trucks equipped with pro-sleeper berths, water intrusion can be found in the bunk control panel area and pool in the tops of the dome light, tv/vcr, and or refrigerator power switches.

    Remedy: Dealers will install a water shield over the back of the entire bunk control panel. Owner notification began on july 16, 2004. Owners should contact international at 1-800-448-7825.

  2. Slack adjusters (service brakes)

    NHTSA 01V023000 Reported 2,855 vehicles potentially affected INTERNATIONAL TRUCK AND ENGINE

    Vehicle description: heavy duty trucks equipped with air brake haldex automatic slack adjusters, long stroke brake chambers, and dana brakes. The automatic slack adjuster anchor brackets can fail due to fatigue fracture and completely separate, causing the slack adjusters to function as manual slack adjusters.

    Remedy: Dealers will install a new bracket on each suspect slack adjuster. Owner notification began february 22, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive…

  3. Vehicle speed control

    NHTSA 96V181002 Reported 93 vehicles potentially affected INTERNATIONAL TRUCK AND ENGINE

    These vehicles are equipped with a detroit diesel optimized idle system. If the ignition is turned on and the fuse for the electronic control module (ECM) power feed line is removed or burned out, unintentional cranking of the engine will occur..

    Remedy: Detroit diesel distributors will rewire the vehicles using a revised ECM which will eliminate unintentional cranking.

  4. Suspension: rear

    NHTSA 96V240000 Reported 233 vehicles potentially affected INTERNATIONAL TRUCK AND ENGINE

    Vehicle description: school buses and heavy duty trucks equipped with rear axle assemblies produced by dana spicer. Certain rear axle assemblies were improperly heat treated which could allow pinion breakage at the pinion threads.

    Remedy: Dealers will replace the rear axle carrier/pinion assembly.

  5. Suspension: rear

    NHTSA 96V233002 Reported 1,133 vehicles potentially affected INTERNATIONAL TRUCK AND ENGINE

    The drive axle housings consist of a plate steel center section and two forged spindles, one of which is welded to each end of the center section. Each spindle contains a keyway slot in which the locking tab for the wheel bearing nut locking mechanism is inserted. The length of the keyway slot may not be long enough to accommodate the…

    Remedy: Dealers will replace the drive axle housing nuts with a conventional wheel nut hardware system.

1 owner complaint filed with NHTSA

Owners of the 1997 International Harvester 9200 have filed 1 complaint with NHTSA; 1 describe a crash. Complaints peaked in 2000 with 1 filed that year.

Most-reported components

What owners are reporting

“Semi was towing another semi when trailing apparatus failed and vehicle separated and went into ditch. (ohio traffic crash report) *mjs”

Owner complaint to NHTSA, January 28, 2000 · Trailer hitches

Compare International Harvester 9200 model years

Recall and complaint counts for every International Harvester 9200 model year in NHTSA's database.

Model yearRecallsComplaints
1994 International Harvester 920010
1995 International Harvester 920020
1996 International Harvester 920051
1997 International Harvester 920051
1998 International Harvester 920031
1999 International Harvester 920033
2000 International Harvester 920030
2001 International Harvester 920020

Checking a specific 1997 International Harvester 9200

How do I know if my 1997 International Harvester 9200 has an open recall?

Enter your 17-character VIN above. The VIN is on the driver's side dashboard (visible through the windshield), the driver's door jamb sticker, and your registration or insurance card. The check runs against NHTSA's live database and tells you which campaigns list your vehicle. 5 campaigns currently list the 1997 International Harvester 9200; your car may already have been repaired under some of them.

Is the recall repair free?

Yes. Under federal law, manufacturers must fix safety recalls at no charge for vehicles up to 15 years old from the date of sale to the first owner. Contact any authorised International Harvester dealer with your VIN and the NHTSA campaign number (for example 01V023000).

What is the difference between a recall and a complaint?

A recall is a safety campaign filed by the manufacturer or ordered by NHTSA, with a defined defect and remedy. A complaint is a report an owner sent to NHTSA; it is not verified, but patterns of complaints are what trigger NHTSA investigations and, eventually, recalls.

Other International Harvester models

Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.