Dodge W100 Recalls & Complaints by Model Year
NHTSA lists 18 safety recalls and 4 owner complaints across 15 model years of the Dodge W100 (1966–1990). The most-complained-about year is 1988.
Pick your Dodge W100 model year
| Model year | Recalls | Complaints |
|---|---|---|
| 1990 Dodge W100 | 1 | 0 |
| 1989 Dodge W100 | 1 | 0 |
| 1988 Dodge W100 | 2 | 2 |
| 1987 Dodge W100 | 2 | 0 |
| 1985 Dodge W100 | 0 | 1 |
| 1978 Dodge W100 | 5 | 0 |
| 1977 Dodge W100 | 3 | 0 |
| 1976 Dodge W100 | 1 | 1 |
| 1975 Dodge W100 | 2 | 0 |
| 1974 Dodge W100 | 1 | 0 |
| 1973 Dodge W100 | 3 | 0 |
| 1972 Dodge W100 | 3 | 0 |
| 1968 Dodge W100 | 1 | 0 |
| 1967 Dodge W100 | 1 | 0 |
| 1966 Dodge W100 | 1 | 0 |
What Dodge W100 owners complain about
Across all model years, owners have filed 4 complaints with NHTSA. The 1988 model year has the most, with 2.
All Dodge W100 recalls (18)
Every NHTSA safety campaign that lists a Dodge W100, most recent first, with the model years each one covers.
-
Bumpers (structure)
In a rear end collision, the pickup box crossmember could contact the fuel pump modules fuel line, causing a fuel leak which would be in non-compliance with FMVSS 301.
Remedy: Install two pickup box reinforcement blocker brackets to the undercarriage to eliminate contact with fuel line.
Model years: 1987, 1988, 1989, 1990
-
Gear position indication (prndl) (power train)
Automatic transmission may contain a park sprag rod assembly that may stick in the tooth butt unengaged position.
Remedy: All involved vehicles will have the park sprag rod assemblies replaced.
Model years: 1988
-
Clutch assembly (power train)
Plastic hydraulic clutch system components are subject to exhaust system heat damage due to prolonged cold, high speed idle operation.
Remedy: Install protective heat shields between the exhaust system and affected clutch system components.
Model years: 1987
-
Hoses, lines/piping, and fittings (service brakes)
Due to improper material construction the hydro-boost fluid return hose may not be capable of withstanding the temperatures and/or pressures experienced with the hydro-boost system. Also, the hydro-boost fluid high pressure hose assembly may have been mislocated, allowing the assembly to contact the frame side rail. Abrasion resulting…
Remedy: The dealer will install a hydro-boost fluid return hose constructed form the proper material, positioning the hose assembly to ensure adequate clearance between it and the frame side rail.
Model years: 1978
-
Hose, piping, and connections (steering)
Improper routing of the "hydroboost" hydraulic system high pressure hose assembly could allow a tubular section to contact the frame side rail. Abrasion from the contact could result, causing a leak in the hose assembly.
Remedy: The dealer will reroute "hydroboost" high pressure hose assemblies and any damaged hoses will be replaced.
Model years: 1978
-
Tank assembly (fuel system)
Remedy: Dealer will inspect the fuel tank vent systems for blockage and correct, if necessary. Fuel tanks will be inspected for cracking of the front panel and replaced, if necessary.
-
Steering wheel/handle bar (steering)
An intermediate steering shaft containing a mismatched pot coupling assembly may have been installed on the involved vehicles. This coupling may have an oversized serration diameter. An oversized serration could prevent the coupling from adequately tightening onto the gear or shaft splines.
Remedy: The dealer will inspect and, if necessary, install a replacement shaft coupling.
Model years: 1978
-
Hoses, lines/piping, and fittings (fuel system)
The fuel tubes (fuel tank to pump) on the involved vehicles may be routed such that tube to underbody reinforcement flange interference may result during vehicle operation. Tube abrasion caused by such interference may result in fuel leakage.
Remedy: Dealer will reroute the fuel tube or install a new fuel tube, if damaged, without charge to owner.
-
Driveline (power train)
The front driving axle wheel hubs on the involved vehicles may fail due to improperly machined spindles. This error may prevent the wheel hub and bearing from seating properly, causing bearing failure and eventual hub fracture. Also, the front wheel could detach due to hub fracture.
Remedy: The dealer will inspect and, if necessary, install a new front axle assembly, without charge to owner.
Model years: 1977
-
Unknown or other
Model years: 1975, 1976
-
Wheels
Model years: 1975
-
Hub (suspension)
Model years: 1973, 1974
-
Labels (equipment)
Model years: 1973
-
Latch (latches/locks/linkages)
Model years: 1973
-
Connection (steering)
Model years: 1972
-
Connection (steering)
Model years: 1972
-
Structure
Model years: 1972
-
Hubcap/cover (wheels)
Model years: 1966, 1967, 1968
Other Dodge models
- Durango13,770 complaints
- Grand Caravan13,508 complaints
- RAM 150012,416 complaints
- Caravan10,526 complaints
- Dakota6,629 complaints
- RAM 25006,443 complaints
- Intrepid6,228 complaints
- Charger5,741 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.