Chevrolet P3 Recalls & Complaints by Model Year
NHTSA lists 5 safety recalls and 9 owner complaints across 11 model years of the Chevrolet P3 (1985–1998). The most-complained-about year is 1997.
Pick your Chevrolet P3 model year
| Model year | Recalls | Complaints |
|---|---|---|
| 1998 Chevrolet P3 | 0 | 3 |
| 1997 Chevrolet P3 | 0 | 3 |
| 1996 Chevrolet P3 | 1 | 2 |
| 1992 Chevrolet P3 | 1 | 0 |
| 1991 Chevrolet P3 | 4 | 1 |
| 1990 Chevrolet P3 | 2 | 0 |
| 1989 Chevrolet P3 | 1 | 0 |
| 1988 Chevrolet P3 | 1 | 0 |
| 1987 Chevrolet P3 | 1 | 0 |
| 1986 Chevrolet P3 | 1 | 0 |
| 1985 Chevrolet P3 | 1 | 0 |
What Chevrolet P3 owners complain about
Across all model years, owners have filed 9 complaints with NHTSA. The 1997 model year has the most, with 3.
All Chevrolet P3 recalls (5)
Every NHTSA safety campaign that lists a Chevrolet P3, most recent first, with the model years each one covers.
-
Fan (engine and engine cooling)
The engine cooling fan assemblies can break from fatigue caused by engine and/or vehicle induced stresses.
Remedy: Dealers will replace the existing engine cooling fan with a newly released fan assembly having rivets with larger heads.
Model years: 1996
-
Wheels
The 19.5 x 6 front steel wheel disc cracks outside the mounting bolt circle and ends at the hub's diameter.
Remedy: Replace all six (seven if there is a spare) defective wheels with newly designed wheels.
Model years: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992
-
Tank assembly (fuel system)
Some chassis were shipped to body builders with damaged fill or vent opening caps on the right-hand side. If a left-hand fill system was installed on the tank, and there was a damaged right-hand cap, the fuel system would not be sealed.
Remedy: Install new caps on the vehicles with unused right-hand fill or vent openings.
Model years: 1991
-
Conventional (parking brake)
The automatic apply transmission mounted parking brake lever pivot bolt "finger" may be loose.
Remedy: Torque pivot bolt to specifications.
Model years: 1991
-
Caliper (service brakes)
Brakes may have missing rear axle outer bearing retaining ring and or greater than specified bearing end play. Either condition allows the rotor and hub assembly to shift position relative to the spindle. This movement can cause brake caliper piston recede farther than normal into the piston bore which would require greater than normal…
Remedy: Replace both rear axle hubs.
Model years: 1990, 1991
Other Chevrolet models
- Malibu19,364 complaints
- Silverado 150018,029 complaints
- Impala10,434 complaints
- Tahoe10,032 complaints
- Equinox9,161 complaints
- Silverado8,799 complaints
- Blazer8,192 complaints
- Suburban8,164 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.