Chevrolet Corsica Recalls & Complaints by Model Year
NHTSA lists 15 safety recalls and 836 owner complaints across 11 model years of the Chevrolet Corsica (1987–1997). The most-complained-about year is 1992.
Pick your Chevrolet Corsica model year
| Model year | Recalls | Complaints |
|---|---|---|
| 1997 Chevrolet Corsica | 0 | 1 |
| 1996 Chevrolet Corsica | 0 | 110 |
| 1995 Chevrolet Corsica | 0 | 102 |
| 1994 Chevrolet Corsica | 1 | 123 |
| 1993 Chevrolet Corsica | 0 | 100 |
| 1992 Chevrolet Corsica | 1 | 125 |
| 1991 Chevrolet Corsica | 1 | 108 |
| 1990 Chevrolet Corsica | 2 | 55 |
| 1989 Chevrolet Corsica | 5 | 64 |
| 1988 Chevrolet Corsica | 4 | 46 |
| 1987 Chevrolet Corsica | 6 | 2 |
What Chevrolet Corsica owners complain about
Across all model years, owners have filed 836 complaints with NHTSA. The 1992 model year has the most, with 125.
All Chevrolet Corsica recalls (15)
Every NHTSA safety campaign that lists a Chevrolet Corsica, most recent first, with the model years each one covers.
-
Suspension: front
The suspension support assemblies do not meet general motors corporation's specification for weld integrity and the affected weld can fail causing the front of the control arm to separate from the suspension support assembly.
Remedy: Install revised suspension supports with adequate weld integrity.
Model years: 1994
-
Switch (exterior lighting)
The service brake stop lamp switch becomes inoperative.
Remedy: Replace the stop lamp switch and correct the wiring in the connector of the stop lamp switch wiring harness.
Model years: 1992
-
Wheels
The styled steel wheels can have cracks developing at the outer edges of the wheel where the spokes meet the rim. The cracks propagate from each side of a spoke toward each other, and eventually meet. The meeting of the cracks results in complete seaparation of a spoke from the wheel.
Remedy: Replace the involved wheel assemblies.
Model years: 1989
-
Seat belts
The front shoulder belt retractors may have reduced sensitivity of the lock-up feature and would not function in a sudden deceleration or crash.
-
Hood (structure)
Secondary hood latch assembly on these vehicles may not be properly adjusted and could become bent. This will lead to a condition where full primary latch engagement is not attained.
Remedy: Replace the primary hood latch assembly, the secondary hood latch assembly, and the support bracket.
-
Steering wheel/handle bar (steering)
Nut attaching steering wheel may not have been properly tightened during installation.
Remedy: Tighten the nut to the proper torque as necessary.
Model years: 1991
-
Seat belts: rear/other
Owner's manuals were printed with rear center seat belt information omitted.
Remedy: Insert missing information into owners manual.
Model years: 1990
-
Hinge and attachments (structure)
A door hinge (upper or lower) may break while opening or closing the door making it difficult to reposition and close properly.
Remedy: Replace door hinges on both doors.
-
Seats
The front seat frame assembly may contain an improper, missing and/or mislocated weld that could fracture.
Remedy: Replace both front seat assemblies.
Model years: 1989
-
Seat belts
Front seat belt latch plates may not engage the buckle assemblies.
Remedy: Replace improperly functioning buckle assemblies.
Model years: 1989
-
Tank assembly (fuel system)
A fuel tank leak could occur due to small creases on the tank underside cracking during pressure cycling which occurs during normal operation.
Remedy: Replace fuel tank.
Model years: 1989
-
Latch (latches/locks/linkages)
Secondary hood latch assembly may not have been properly adjusted resulting in latch becoming bent.
Remedy: Inspect and replace secondary hood latch assemblies as required.
-
Latch (latches/locks/linkages)
Loss of skid plate could lead to disengagement of both secondary and primary hood latches.
Remedy: Install a secondary latch skid plate and/or secondary latch skid plate retaining screws.
Model years: 1987
-
Switch (exterior lighting)
Part of pushbutton attachment of headlight switch may fracture. Consequence of defect: push button would not latch in on position resulting in inability to turn on headlights, reduced driver visibility, and the potential for a crash.
Remedy: Install new headlight switch.
Model years: 1987
-
Latch (latches/locks/linkages)
Secondary hood latch may not properly engage due to contact with support bracket and/or the primary latch return spring. Consequence of defect: if this occurs while vehicle is in motion, hood could open and contact the windshield, affecting the drivers vision area; this could result in a crash without warning.
Remedy: Install secondary latch skid plate on corsica and beretta models. Also, install a revised secondary latch assembly on beretta models.
Model years: 1987
Other Chevrolet models
- Malibu19,364 complaints
- Silverado 150018,029 complaints
- Impala10,434 complaints
- Tahoe10,032 complaints
- Equinox9,161 complaints
- Silverado8,799 complaints
- Blazer8,192 complaints
- Suburban8,164 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.