RecallMyCar

Altec AT235 Recalls & Complaints by Model Year

NHTSA lists 4 safety recalls and 0 owner complaints across 6 model years of the Altec AT235 (2006–2013).

4
safety recalls, all years
0
owner complaints, all years
2012
year with most recalls

Pick your Altec AT235 model year

Model yearRecallsComplaints
2013 Altec AT23510
2012 Altec AT23530
2011 Altec AT23520
2010 Altec AT23520
2007 Altec AT23510
2006 Altec AT23510

All Altec AT235 recalls (4)

Every NHTSA safety campaign that lists a Altec AT235, most recent first, with the model years each one covers.

  1. Equipment and exhaust system (engine and engine cooling)

    NHTSA 13V458000 Reported 1,145 vehicles potentially affected Altec Industries Inc.

    Altec Industries, Inc. (Altec) is recalling certain model year 2010-2013 AT200A, AT235, AT235P, AT30-G, AT35-G, AT37-G, AT40-G and AT237 Aerial Devices mounted on Ford Super Duty Chassis' equipped with 6.8L gas engines and Muncie FR67 power take offs (PTO). In the affected vehicles, oil may leak from the PTO pressure switch onto a…

    Remedy: Altec will notify owners, and dealers will replace the affected pressure switch and thermal blanket with the kit identified by Muncie, free of charge. The recall began on December 9, 2013. Consumerr's may contact Altec…

    Model years: 2010, 2011, 2012, 2013

  2. Cables (electrical system)

    NHTSA 13V224000 Reported 761 vehicles potentially affected Altec Industries Inc.

    Altec Industries, Inc. is recalling certain model year 2010-2012 AT200A, AT235/235P, AT237, AT248F, AT35/37-G, and AT40-G aerial devices built on Ford F550 chassis with a gross vehicle weight rating of 19,500lbs. The battery cable going to the unit auxiliary functions could be damaged and possibly short to ground.

    Remedy: Altec began notifying affected owners on April 24, 2013. Dealers will re-route the auxiliary function battery cables. Owners may contact Altec at 1-800-860-0183. Altec's recall number is CSN 565.

    Model years: 2010, 2011, 2012

  3. Torsion bar (suspension)

    NHTSA 12V390000 Reported 141 vehicles potentially affected ALTEC INDUSTRIES INC.

    Altec Industries, Inc. is recalling certain model year 2012 Aerial Device vehicles built on a Navistar Terrastar chassis because the Altec-installed torsion bar increases the ride height of the front suspension, which when the vehicle hits bumps, may cause the vehicle to alter its steering direction.

    Remedy: Altec will notify owners, and will install an updated bracket and spring kit, free of charge. The safety recall began on August 27, 2012. Owners may contact Altec Industries at 1-877-462-5832.

    Model years: 2012

  4. Hose, piping, and connections (steering)

    NHTSA 10V399000 Reported 34 vehicles potentially affected ALTEC INDUSTRIES INC.

    Altec is recalling certain model year 2006-2007 at200a, at235, model year 2007-2010 at235p and model year 2008 at3xg trucks built on GM chassis. There is a potential hydraulic hose routing condition in the engine compartment. The hose could contact and cause some abrasions to an oem 12v chassis wire or possibly rub on the steel power…

    Remedy: Altec will provide instructions to dealers on how to inspect and install the new bracket free of charge. This service will be performed free of charge. The safety recall began on september 15, 2010. Owners may contact…

    Model years: 2006, 2007

Other Altec models

Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.