2007 Mack Cv Recalls, Complaints & Specs
8 safety recalls list the 2007 Mack Cv. Check your own VIN below.
8 safety recalls for the 2007 Mack Cv
Most recent first. Recall repairs are free at any authorised dealer. Click a recall for the full defect, consequence and remedy text.
-
Flasher unit (exterior lighting)
Mack Trucks Inc. (Mack) is recalling certain model year 2010-2014 CHU, CXU, and MRU, 2007 CT and CV, 2008-2014 GU, and 2011-2014 LEU, and TD trucks manufactured February 28, 2006, through November 8, 2013, and equipped Hamsar Electronic Flasher. The hazard warning lights may fail.
Remedy: Mack will notify owners, and dealers will replace the electronic flasher unit, free of charge. The recall will begin by mid-June 2014. Interim letters went out to owners on June 23, 2014. The recall began on July 25,…
-
Fifth wheel assembly (trailer hitches)
On certain trucks equipped with a saf holland simplex fifth wheel, the lever arm pivot bolt may have been over tightened. An over tightened pivot bolt can distort the pivot bolt spacer sleeve, which may prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin.
Remedy: Dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer free of charge. The recall began on january 28, 2008. Owners may contact mack trucks at 1-800-528-6586.
-
Parking brake
On certain trucks equipped with bendix sr-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button.
Remedy: Mack is working with bendix to repair these vehicles (please see 07e037). Bendix will install a check valve repair kit for the affected sr-7 spring brake modulating valve free of charge. The recall began on january 10,…
-
Check valve (service brakes)
On certain trucks equipped with parker single check valves (scv) provided by bendix. The defect exists in the parker scv that connects with the supply port of the sr-7 spring brake modulating valve. After prolonged use of the parker scv, the valve body retainer may become excessively worn and eventually break apart. Pieces of the parker…
Remedy: Mack is working with bendix to replace the parker single check valve. The recall began on january 9, 2008. Owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586.
-
Suspension
On certain trucks equipped with a 46k pound chalmers rear suspension, the adjustable torque rods used on the suspension may be brittle.
Remedy: Dealers will inspect and repair the rods as required free of charge. The recall began on march 14, 2007. Owners may contact mack trucks at 1-800-528-6586.
-
Service brakes, air
Certain trucks equipped with a front glad hand option fail to comply with the performance criteria requirements of federal motor vehicle safety standard no. 121, 'air brake systems.'
Remedy: Dealers will replace the spring brake modulating valve free of charge. The recall began on october 16, 2006. Owners may contact mack truck at 1-800-528-6586.
-
Service brakes, air
On certain trucks equipped with a legris air manifold, the brass push-to-connect cartridge may unexpectedly separate from the plastic housing.
Remedy: Dealers will replace the air manifold free of charge. The recall began on september 27, 2006. Owners may contact mack trucks at 1-800-528-6586.
-
Air (parking brake)
On certain trucks equipped with sr-7 bendix brake valves, the check valve inside the valve cavity may not properly set, causing internal air leakage. If the check valve does not properly seat, the resulting leakage can cause a delay in the application of the spring brakes to park the vehicle after operator pulls the dash valve button.
Remedy: Dealers will inspect the valves and replace it free of charge. The recall began on august 14, 2006. Owners may contact mack trucks at 1-800-528-6586.
No owner complaints on file
NHTSA has no owner complaints on file for the 2007 Mack Cv. For context, the average model year in NHTSA's database has dozens; a zero can mean a reliable vehicle, a rare one, or both.
Compare Mack Cv model years
Recall and complaint counts for every Mack Cv model year in NHTSA's database.
| Model year | Recalls | Complaints |
|---|---|---|
| 1998 Mack Cv | 1 | 0 |
| 1999 Mack Cv | 2 | 0 |
| 2000 Mack Cv | 3 | 0 |
| 2001 Mack Cv | 6 | 0 |
| 2002 Mack Cv | 3 | 0 |
| 2003 Mack Cv | 5 | 2 |
| 2004 Mack Cv | 6 | 0 |
| 2005 Mack Cv | 4 | 2 |
| 2006 Mack Cv | 5 | 0 |
| 2007 Mack Cv | 8 | 0 |
| 2008 Mack Cv | 3 | 0 |
Checking a specific 2007 Mack Cv
How do I know if my 2007 Mack Cv has an open recall?
Enter your 17-character VIN above. The VIN is on the driver's side dashboard (visible through the windshield), the driver's door jamb sticker, and your registration or insurance card. The check runs against NHTSA's live database and tells you which campaigns list your vehicle. 8 campaigns currently list the 2007 Mack Cv; your car may already have been repaired under some of them.
Is the recall repair free?
Yes. Under federal law, manufacturers must fix safety recalls at no charge for vehicles up to 15 years old from the date of sale to the first owner. Contact any authorised Mack dealer with your VIN and the NHTSA campaign number (for example 06V232000).
What is the difference between a recall and a complaint?
A recall is a safety campaign filed by the manufacturer or ordered by NHTSA, with a defined defect and remedy. A complaint is a report an owner sent to NHTSA; it is not verified, but patterns of complaints are what trigger NHTSA investigations and, eventually, recalls.
Other Mack models
- Mack28 complaints
- Anthem (an)12 complaints
- Granite (gr)9 complaints
- CXU6127 complaints
- Ch6 complaints
- Gu6 complaints
- CH6005 complaints
- Cxu5 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.