Isuzu Pickup Truck Recalls & Complaints by Model Year
NHTSA lists 12 safety recalls and 67 owner complaints across 17 model years of the Isuzu Pickup Truck (1979–1997). The most-complained-about year is 1990.
Pick your Isuzu Pickup Truck model year
| Model year | Recalls | Complaints |
|---|---|---|
| 1997 Isuzu Pickup Truck | 0 | 1 |
| 1996 Isuzu Pickup Truck | 0 | 1 |
| 1995 Isuzu Pickup Truck | 2 | 8 |
| 1994 Isuzu Pickup Truck | 2 | 10 |
| 1993 Isuzu Pickup Truck | 0 | 6 |
| 1992 Isuzu Pickup Truck | 0 | 9 |
| 1991 Isuzu Pickup Truck | 1 | 7 |
| 1990 Isuzu Pickup Truck | 1 | 10 |
| 1989 Isuzu Pickup Truck | 0 | 6 |
| 1988 Isuzu Pickup Truck | 0 | 3 |
| 1987 Isuzu Pickup Truck | 0 | 2 |
| 1986 Isuzu Pickup Truck | 0 | 3 |
| 1984 Isuzu Pickup Truck | 0 | 1 |
| 1982 Isuzu Pickup Truck | 3 | 0 |
| 1981 Isuzu Pickup Truck | 3 | 0 |
| 1980 Isuzu Pickup Truck | 2 | 0 |
| 1979 Isuzu Pickup Truck | 1 | 0 |
What Isuzu Pickup Truck owners complain about
Across all model years, owners have filed 67 complaints with NHTSA. The 1990 model year has the most, with 10.
All Isuzu Pickup Truck recalls (12)
Every NHTSA safety campaign that lists a Isuzu Pickup Truck, most recent first, with the model years each one covers.
-
Buckle assembly (seat belts)
On certain sport utility vehicles and pickup trucks, the latch plate used in the seat belt buckle was not manufactured according to design dimensions. If the seat belt tongue is inserted slowly at an angle into the buckle, there is a possibility of partial engagement.
Remedy: Dealers will inspect the buckle and, if necessary, replace the buckle assembly with a new buckle. Owner notification is expected to begin during mid-december 2002. Owners who take their vehicles to an authorized dealer…
Model years: 1994, 1995
-
Alternator/generator/regulator (electrical system)
An integrated circuit within the voltage regulator can contain manufacturing errors.
Remedy: Dealers will replace the voltage regulator with a new regulator.
Model years: 1995
-
Buckle assembly (seat belts)
The latch plate used in the seat belt buckle was not manufactured according to design dimensions. If the seat belt tongue is inserted slowly at an angle into the buckle, there is a possibility of partial engagement.
Remedy: Dealers will inspect the buckle and, if necessary, replace the buckle assembly with a new buckle.
Model years: 1994
-
Buckle assembly (seat belts)
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." if a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
Remedy: Owners should promptly check the condition and operation of both front safety belt buckles and carefully inspect the red release button for any breaks or cracks. They should ensure that both buckles are operating…
Model years: 1990, 1991
-
Fuel injection system (fuel system)
The fuel pump may stop functioning without warning. This can occur because an electrical connector in the fuse panel may overheat and interrupt the electrical circuit.
Remedy: Dealer will inspect the fuse box and its connectors for corrosion, and correct where necessary. A bypass adapter to the fuel pump electrical circuit will be installed.
Model years: 1980
-
Gas recirculation valve (egr valve) (engine and engine cooling)
The egr valve assembly may develop cracks at the welded joint between the valve and the valve shaft. Cracks may enlarge with continued use and the valve could separate from the shaft.
Remedy: Dealer will install a new egr gasket and valve, if necessary.
Model years: 1982
-
Engine (engine and engine cooling)
During a piston pin manufacturing process, cracks have occurred in the inner surface of the pin. These cracks could lead to complete breakage of the pin, which in turn could result in engine failure and possible sudden engine seizure.
Remedy: Dealer will replace piston pins on the involved vehicles at no cost to owner.
Model years: 1982
-
Tie rod assembly (steering)
A lock nut which secures the tie rod to the inner ball joint of the steering system may not have been securely fastened on some of the involved vehicles during assembly. If this condition exists and the vehicle is driven along poor roads for an extended period of time, the tie rod could separate from the steering assembly.
Remedy: Dealer will check the lock nut for adequate tightness, correcting where necessary.
Model years: 1981
-
Axle shaft (power train)
The cotter pin, which is used to secure the rear axle shaft lock nut, may have been inadvertently omitted during vehicle assembly. If the cotter pin is missing, the lock nut could loosen during vehicle operation. This could lead to a separation of the brake drum/rear wheel assembly from the axle shaft.
Remedy: Upon inspection, a cotter pin will be installed if missing and the lock nut will be properly secured without charge to owner.
Model years: 1982
-
Suspension: front
The involved pick-up trucks may exhibit vibration or shimmy in the front suspension and steering system under certain driving conditions.
Remedy: The dealer will install a steering damper at no cost to owner within 36 months from the original date of first vehicle use.
Model years: 1979
-
Tie rod assembly (steering)
The left and right outer tie rod ends of the steering system may have circumferential cracks due to an improper machine set-up in the manufacturing process.
Remedy: The tie rod ends will be inspected and, if necessary, replaced at no charge to owner.
Model years: 1981
-
Filler pipe and cap (fuel system)
On some vehicles, the pressure could increase inside the fuel tank from high surrounding temperatures when the fuel tank is more than half full.
Remedy: Dealer will install a restrictor valve into the fuel filler pipe, without charge to owner.
Model years: 1980, 1981
Other Isuzu models
- Rodeo2,477 complaints
- Trooper576 complaints
- Ascender205 complaints
- Amigo185 complaints
- Axiom158 complaints
- Hombre122 complaints
- Rodeo Sport107 complaints
- Vehicross69 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.