2003 International 4200 Recalls, Complaints & Specs
7 safety recalls list the 2003 International 4200. Check your own VIN below.
7 safety recalls for the 2003 International 4200
Most recent first. Recall repairs are free at any authorised dealer. Click a recall for the full defect, consequence and remedy text.
-
Vehicle speed control
Navistar is recalling certain model year 2003 through 2010 international trucks and ic commercial buses manufactured from december 4, 2001 through december 14, 2009 equipped with international vt365 engines having engine calibration pan2pvr0, pan2pvr1, or pan2pwr. The engine normally responds to a failed open accelerator position sensor…
Remedy: Navistar will notify owners and dealers will repair the vehicles free of charge. The safety recall began on july 1, 2010. Owners may contact navistar at 1-800-448-7825.
-
Compressor (service brakes)
On certain trucks equipped with v8 engines and air brakes or air operated park brakes, a stand-off bracket was not installed. The bracket supports the copper air compressor discharge tube. Normal vehicle and engine vibration can cause the unsupported copper tube to fail at or near the air compressor connection.
Remedy: Dealers will inspect and repair the stand-off bracket as necessary. Owner notification is expected to begin during december 2003. Owners should contact international truck at 1-800-448-7825.
-
Hoses, lines/piping, and fittings (service brakes)
Certain heavy duty trucks fail to comply with the requirements of federal motor vehicle safety standard no. 121, "air brake systems." the primary and secondary air supply hoses from the foot valve to the primary and secondary air tanks were improperly routed at the tank.
Remedy: Dealers will inspect and repair vehicles. Owner notification will be completed by october 3, 2003. Owners who take their vehicle to an authorized dealer on an agreed upon service date and do not receive the free remedy…
-
Service brakes, hydraulic
Certain school buses and heavy duty trucks built with hydraulic brakes and an air powered parking brake (brake code 04gas) fail to comply with the requirements of federal motor vehicle safety standard no. 105, "hydraulic and electric brake systems." the hydraulic brake monitor module was not installed on certain vehicles.
Remedy: Dealers will install the hydraulic brake monitor module. Owner notification is began during february 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the…
-
Conventional (parking brake)
On certain medium and heavy duty trucks built with driveline parking brake codes 04gar, the parking brake assembly may not hold the vehicle in position when set. Factors contributing to this possibility are as follows: (1) cracked or broken cams; (2) loose or broken anchor bolts; (3) initial shoe diameter not set properly during…
Remedy: Dealers will replace the cam, lever, and bolt. Owner notification began december 30, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within…
-
Engine (engine and engine cooling)
On certain school buses and heavy duty trucks built with international vt365 engines and manufactured at international diesel of alabama. The injector driver modules (idm) built for the vt365 engines could have missing vibration damping/retention shells and a missing hot-melt process on the DC/DC boards.
Remedy: Dealers will replace the idm modules. Owner notification began october 28, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a…
-
Connection (steering)
On certain trucks, the cotter pin that goes through the drag link ball stud at the connection to the pitman arm is missing. This pin prevents the castle nut from loosening.
Remedy: Dealers will inspect the vehicle and install a cotter pin if it is missing. Owner notification began april 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not…
No owner complaints on file
NHTSA has no owner complaints on file for the 2003 International 4200. For context, the average model year in NHTSA's database has dozens; a zero can mean a reliable vehicle, a rare one, or both.
Compare International 4200 model years
Recall and complaint counts for every International 4200 model year in NHTSA's database.
Checking a specific 2003 International 4200
How do I know if my 2003 International 4200 has an open recall?
Enter your 17-character VIN above. The VIN is on the driver's side dashboard (visible through the windshield), the driver's door jamb sticker, and your registration or insurance card. The check runs against NHTSA's live database and tells you which campaigns list your vehicle. 7 campaigns currently list the 2003 International 4200; your car may already have been repaired under some of them.
Is the recall repair free?
Yes. Under federal law, manufacturers must fix safety recalls at no charge for vehicles up to 15 years old from the date of sale to the first owner. Contact any authorised International dealer with your VIN and the NHTSA campaign number (for example 02V095000).
What is the difference between a recall and a complaint?
A recall is a safety campaign filed by the manufacturer or ordered by NHTSA, with a defined defect and remedy. A complaint is a report an owner sent to NHTSA; it is not verified, but patterns of complaints are what trigger NHTSA investigations and, eventually, recalls.
Other International models
- 430037 complaints
- Prostar35 complaints
- School Bus21 complaints
- International17 complaints
- Ce16 complaints
- LT16 complaints
- 440010 complaints
- 30007 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.