Skip to content

2001 International Harvester 4700 Recalls, Complaints & Specs

4 safety recalls list the 2001 International Harvester 4700, and owners have filed 7 complaints with NHTSA. Check your own VIN below.

4
safety recalls
7
owner complaints to NHTSA
0 / 2
complaints citing a crash / fire

4 safety recalls for the 2001 International Harvester 4700

Most recent first. Recall repairs are free at any authorised dealer. Click a recall for the full defect, consequence and remedy text.

  1. Wheel speed sensor (service brakes)

    NHTSA 04V269000 Reported 81,883 vehicles potentially affected INTERNATIONAL TRUCK & ENGINE CORPORATION

    On certain school buses and truck model vehicles manufactured between february 28, 1999, through april 5, 2004, the anti-lock brake system electronic control unit (ECU) may misinterpret a corrupt wheel speed signal.

    Remedy: International will notify its customers and inspect and repair the affected vehicles free of charge. The recall began august 1, 2004. Owners who take their vehicles to an authorized dealer on an agreed upon service…

  2. Service brakes, air

    NHTSA 03V137000 Reported 2,818 vehicles potentially affected INTERNATIONAL TRUCK & ENGINE CORPORATION

    On certain heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. With certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. The subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.

    Remedy: Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has…

  3. Check valve (service brakes)

    NHTSA 02V135002 Reported 108,560 vehicles potentially affected INTERNATIONAL TRUCK AND ENGINE

    On certain medium and heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. With certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. The subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and…

    Remedy: Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has…

  4. Seats

    NHTSA 01V102000 Reported 1,389 vehicles potentially affected INTERNATIONAL TRUCK AND ENGINE

    Vehicle description: heavy duty trucks equipped with bostrom driver seat models (910, 910sc, or 914) and international's parking brake code 04036. If someone outside the cab adjusts/slides the driver's seat to its most forward position, with the parking brake set, the seat will contact and release the parking brake lever.

    Remedy: Dealers will install a stop-bracket on the seat track to limit the travel of the seat so that the seat can not release the parking brake lever. Owner notification began april 20, 2001. Owners who take their vehicles to…

7 owner complaints filed with NHTSA

Owners of the 2001 International Harvester 4700 have filed 7 complaints with NHTSA; 2 describe a fire. The average mileage at failure in those reports is 49,422 miles. Complaints peaked in 2004 with 3 filed that year.

Most-reported components

What owners are reporting

“The gauges and speedometer quit working on the dash of the 2001 international model 4700. So far there have been no consequences but i have been hearing that it is a hazardous occurence because of the”

Owner complaint to NHTSA, August 17, 2005 · Electrical system

“The brakes have been defective since consumer purchased the vehicle. Consumer's vehicle was included in a recall for the same brake problem, but problem recurred. ABS light was still on after being se”

Owner complaint to NHTSA, November 19, 2004 · Service brakes, hydraulic

Compare International Harvester 4700 model years

Recall and complaint counts for every International Harvester 4700 model year in NHTSA's database.

Model yearRecallsComplaints
1991 International Harvester 470010
1992 International Harvester 470010
1993 International Harvester 470011
1994 International Harvester 470021
1995 International Harvester 470052
1996 International Harvester 470013
1997 International Harvester 4700413
1998 International Harvester 470032
1999 International Harvester 470055
2000 International Harvester 470056
2001 International Harvester 470047

Checking a specific 2001 International Harvester 4700

How do I know if my 2001 International Harvester 4700 has an open recall?

Enter your 17-character VIN above. The VIN is on the driver's side dashboard (visible through the windshield), the driver's door jamb sticker, and your registration or insurance card. The check runs against NHTSA's live database and tells you which campaigns list your vehicle. 4 campaigns currently list the 2001 International Harvester 4700; your car may already have been repaired under some of them.

Is the recall repair free?

Yes. Under federal law, manufacturers must fix safety recalls at no charge for vehicles up to 15 years old from the date of sale to the first owner. Contact any authorised International Harvester dealer with your VIN and the NHTSA campaign number (for example 01V102000).

What is the difference between a recall and a complaint?

A recall is a safety campaign filed by the manufacturer or ordered by NHTSA, with a defined defect and remedy. A complaint is a report an owner sent to NHTSA; it is not verified, but patterns of complaints are what trigger NHTSA investigations and, eventually, recalls.

Other International Harvester models

Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.