GMC P30 Recalls & Complaints by Model Year
NHTSA lists 5 safety recalls and 2 owner complaints across 7 model years of the GMC P30 (1975–1997). The most-complained-about year is 1997.
Pick your GMC P30 model year
- 1975
- 1976
- 1978
- 1982
- 1985
- 1986
- 1997
| Model year | Recalls | Complaints |
|---|---|---|
| 1997 GMC P30 | 0 | 2 |
| 1986 GMC P30 | 1 | 0 |
| 1985 GMC P30 | 1 | 0 |
| 1982 GMC P30 | 1 | 0 |
| 1978 GMC P30 | 1 | 0 |
| 1976 GMC P30 | 1 | 0 |
| 1975 GMC P30 | 2 | 0 |
What GMC P30 owners complain about
Across all model years, owners have filed 2 complaints with NHTSA. The 1997 model year has the most, with 2.
All GMC P30 recalls (5)
Every NHTSA safety campaign that lists a GMC P30, most recent first, with the model years each one covers.
-
Suspension: lower arm
Left hand lower control arm can crack and could eventually cause the lower ball joint to separate from the control arm.
Remedy: Repair or replace lower left control arm.
Model years: 1985, 1986
-
Filler pipe and cap (fuel system)
In a vehicle impact from the rear, the three piece hoses could separate and result in fuel leakage in excess of the amount permitted by federal motor vehicle safety standard no. 301, "fuel system integrity".
Remedy: A new fuel filler hose will be installed by dealer on all involved vehicles.
Model years: 1982
-
Steering wheel/handle bar (steering)
The intermediate shaft coupling on the involved vehicles may have been machined oversized in the serration area where it attaches to the steering column. This would prevent the coupling from properly tightening on the shaft when the clamp and pinch bolt were installed.
Remedy: Dealer will replace the shaft coupling, if necessary, without charge to owner.
Model years: 1978
-
Suspension: lower arm
The front suspension control arms were assembled with ball joints which may contain sockets that were not properly heat-treated. This may cause the socket to wear rapidly and allow the ball joint stud to separate from the socket, causing either the left or right wheel suspension to collapse.
Remedy: Dealer will inspect and, where necessary, will replace the ball joints without charge to owner.
Model years: 1975, 1976
-
Multi piece (wheels)
Model years: 1975
Other GMC models
- Sierra 15008,930 complaints
- Acadia5,569 complaints
- Yukon4,989 complaints
- Sierra3,937 complaints
- Terrain3,124 complaints
- Jimmy2,720 complaints
- Envoy2,459 complaints
- Yukon XL2,417 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.