Ford L8000 Recalls & Complaints by Model Year
NHTSA lists 8 safety recalls and 0 owner complaints across 15 model years of the Ford L8000 (1970–1995).
Pick your Ford L8000 model year
- 1970
- 1971
- 1972
- 1973
- 1974
- 1975
- 1976
- 1977
- 1978
- 1989
- 1990
- 1992
- 1993
- 1994
- 1995
| Model year | Recalls | Complaints |
|---|---|---|
| 1995 Ford L8000 | 1 | 0 |
| 1994 Ford L8000 | 1 | 0 |
| 1993 Ford L8000 | 3 | 0 |
| 1992 Ford L8000 | 1 | 0 |
| 1990 Ford L8000 | 1 | 0 |
| 1989 Ford L8000 | 1 | 0 |
| 1978 Ford L8000 | 1 | 0 |
| 1977 Ford L8000 | 1 | 0 |
| 1976 Ford L8000 | 2 | 0 |
| 1975 Ford L8000 | 2 | 0 |
| 1974 Ford L8000 | 1 | 0 |
| 1973 Ford L8000 | 1 | 0 |
| 1972 Ford L8000 | 1 | 0 |
| 1971 Ford L8000 | 1 | 0 |
| 1970 Ford L8000 | 2 | 0 |
All Ford L8000 recalls (8)
Every NHTSA safety campaign that lists a Ford L8000, most recent first, with the model years each one covers.
-
Vehicle speed control
The hand throttle cable can wear the brass swivel block on the governor lever through which it passes.
Remedy: Dealers will install a revised governor lever with a stainless steel swivel. Also letters will be sent to vehicle owners that have the same vehicles but do not have a ford installed hand throttle advising them that…
Model years: 1993, 1994, 1995
-
Springs (vehicle speed control)
As a result of inherent vibration in these engines, the throttle return springs can fracture.
Remedy: The throttle return control system with the coil torsion spring design will be replaced.
Model years: 1992, 1993
-
Wheels
Remedy: Replace the clamps and studs on the cast spoke wheels.
Model years: 1993
-
Service brakes, air: controls, pedals and linkages
Secondary service reservoir air check valves may not seat properly due to a mechanical interference condition between a circular brass guide and the wall of a cylindrical ferrule in which the brass guide is intended to move freely.
Remedy: Install revised design secondary service reservoir check valve components.
Model years: 1989, 1990
-
Anchorage (seat belts)
The seat belts on the involved vehicles fail to conform to federal motor vehicle safety standard nos. 208, "occupant crash protection", and 209, "seat belt assemblies". The non-conformity exists because when the driver"s seat is adjusted to the full forward position, the seat cushion is adjusted to maximum elevation, and the seat back…
Remedy: Dealer will replace any seat belt assembly that is determined to be insufficient, without charge to owner.
Model years: 1972, 1973, 1974, 1975, 1976, 1977, 1978
-
Service brakes, air: control unit/module
Model years: 1975, 1976
-
Gear box (other than rack and pinion) (steering)
Model years: 1970, 1971
-
Steering wheel/handle bar (steering)
Model years: 1970
Other Ford models
- F-15037,961 complaints
- Explorer34,566 complaints
- Escape27,430 complaints
- Fusion22,405 complaints
- Focus22,096 complaints
- Taurus18,159 complaints
- Windstar14,158 complaints
- Edge14,065 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.