Skip to content

Terex C4000 Recalls & Complaints by Model Year

NHTSA lists 7 safety recalls and 0 owner complaints across 13 model years of the Terex C4000 (2008–2026).

7
safety recalls, all years
0
owner complaints, all years
2022
year with most recalls

Pick your Terex C4000 model year

Model yearRecallsComplaints
2026 Terex C400020
2025 Terex C400020
2024 Terex C400020
2023 Terex C400020
2022 Terex C400050
2021 Terex C400030
2020 Terex C400030
2019 Terex C400020
2018 Terex C400010
2017 Terex C400010
2016 Terex C400010
2015 Terex C400010
2008 Terex C400010

All Terex C4000 recalls (7)

Every NHTSA safety campaign that lists a Terex C4000, most recent first, with the model years each one covers.

  1. Trailer hitches

    NHTSA 26V639000 Reported 100 vehicles potentially affected Ring Power Corporation

    Ring Power Corporation (Ring Power) is recalling certain 2020 Terex General 65, 2020-2021 C6000, 2020-2022 C4000, and TC55 vehicles. The incorrect pintle hitch may have been installed without reinforced bracing, resulting in the rear bumper hitch plate bending.

    Remedy: Ring Power will inspect, replace the pintle hitch, and install bracing. Damaged bumpers will be replaced. All repairs will be performed free of charge. Owner notification letters are expected to be mailed October 16,…

    Model years: 2020, 2021, 2022

  2. Equipment

    NHTSA 26V534000 Reported 73 vehicles potentially affected Ring Power Corporation

    Ring Power Corporation (Ring Power) is recalling certain 2019-2026 Terex C4000, C5000, C6000, and General 65 digger derrick trucks. An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.

    Remedy: Ring Power will inspect and replace the weldment plate as necessary, free of charge. Owner notification letters are expected to be mailed September 2026. Owners may contact Ring Power's customer service at…

    Model years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

  3. Equipment

    NHTSA 26V167000 Reported 2,303 vehicles potentially affected Terex South Dakota, Inc.

    Terex South Dakota, Inc. (Terex) is recalling certain 2019-2026 General 65, General 80, General 95, C4000, C5000, and C6000 digger utility trucks equipped with pole guides. An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.

    Remedy: Owners will inspect the plate weldment for any cracks or abnormal welds. Dealers or owners will replace the plate weldment as necessary, free of charge. Owner notification letters were mailed June 2, 2026. Owners may…

    Model years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

  4. Boom/crane/ladder (equipment)

    NHTSA 22V893000 Reported 431 vehicles potentially affected Terex South Dakota, Inc.

    Terex South Dakota, Inc. (Terex) is recalling certain 2022 C4000, C5000, C6000, C7000, General, and Trans TL vehicles. A seam in the boom structure may have been improperly welded, causing the weld to crack.

    Remedy: Dealers will replace or repair the boom, free of charge. Owner notification letters were mailed on February 8, 2023. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN715.

    Model years: 2022

  5. Mechanical (equipment)

    NHTSA 22V888000 Reported 40 vehicles potentially affected Terex South Dakota, Inc.

    Terex South Dakota, Inc. (Terex) is recalling certain 2022 C4000, Optima TC, and XT Pro outrigger vehicles. The outrigger cylinder may have been machined incorrectly, which can cause the lock valve cartridge seals to fail, allowing the cylinder to drift.

    Remedy: Dealers will replace the cylinders, free of charge. All affected vehicles were inspected and remedied by December 22, 2022. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall…

    Model years: 2022

  6. Equipment

    NHTSA 18V520000 Reported 101 vehicles potentially affected Terex South Dakota, Inc.

    Terex south Dakota, Inc. (Terex) is recalling certain 2015-2018 Terex C4000, C5000, C6000, and General digger derricks. The welds between the coupler and hex shaft may be undersized, causing them to fail and the auger to fall unexpectedly.

    Remedy: Terex will notify owners, and dealers will either repair the weld or replace the affected component, free of charge. The recall began October 3, 2018. Owners may contact Terex customer service at 1-605-882-4000.…

    Model years: 2015, 2016, 2017, 2018

  7. Equipment

    NHTSA 09V149000 Reported 142 vehicles potentially affected TEREX TELELECT, INC.

    Terex telelect, inc. Is recalling 142 my 2008 c4000, c5000, c6000, c7000, and general digger derrick utility trucks manufactured between september 11 and december 20, 2008, equipped with eaton 25vq hydraulic pumps. Poor adhesion of the bronze material and the steel surface of the flex plate used in the 25vq section may lead to…

    Remedy: Terex will notify owners and repair the vehicles free of charge. The recall began on july 31, 2009. Owners may contact terex utilities warranty department at 1-605-884-3892.

    Model years: 2008

Other Terex models

Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.