Nissan 200SX Recalls & Complaints by Model Year
NHTSA lists 4 safety recalls and 166 owner complaints across 14 model years of the Nissan 200SX (1980–2001). The most-complained-about year is 1995.
Pick your Nissan 200SX model year
| Model year | Recalls | Complaints |
|---|---|---|
| 2001 Nissan 200SX | 0 | 2 |
| 1998 Nissan 200SX | 1 | 18 |
| 1997 Nissan 200SX | 1 | 16 |
| 1996 Nissan 200SX | 1 | 37 |
| 1995 Nissan 200SX | 2 | 51 |
| 1991 Nissan 200SX | 0 | 1 |
| 1989 Nissan 200SX | 0 | 1 |
| 1988 Nissan 200SX | 1 | 8 |
| 1987 Nissan 200SX | 1 | 13 |
| 1986 Nissan 200SX | 0 | 11 |
| 1985 Nissan 200SX | 0 | 6 |
| 1984 Nissan 200SX | 0 | 1 |
| 1983 Nissan 200SX | 0 | 1 |
| 1980 Nissan 200SX | 1 | 0 |
What Nissan 200SX owners complain about
Across all model years, owners have filed 166 complaints with NHTSA. The 1995 model year has the most, with 51.
All Nissan 200SX recalls (4)
Every NHTSA safety campaign that lists a Nissan 200SX, most recent first, with the model years each one covers.
-
Linkages (visibility)
Vehicle description: passenger vehicles. Water can enter and displace the grease in the wiper arm linkage ball joint where the wiper linkage attaches to the wiper motor linkage.
Remedy: To prevent grease from being washed out of the joint, the dealers will modify by adding a water diversion seal that will prevent water from entering the windshield wiper linkage ball joint area.
-
Buckle assembly (seat belts)
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." if a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
Remedy: Owners should promptly check the condition and operation of both front safety belt buckles and carefully inspect the red release button for any breaks or cracks. They should ensure that both buckles are operating…
Model years: 1987, 1988
-
Antilock/traction control/electronic limited slip (service brakes)
The anti-lock braking system (ABS) hydraulic actuator was not properly purged of all air during the fill and evacuation process causing air bubbles to get into the brake system.
Remedy: Dealers will bleed the ABS hydraulic actuator to remove any air bubbles in the brake system.
Model years: 1995
-
Vehicle speed control
Moisture present in the exhaust gas recirculation system may, under conditions of sub-zero temperatures and low egr flow rate, condense and freeze in the throttle chamber. An icing condition could occur if the vehicle owner fails to adequately warm up the engine before driving. This could prevent the throttle from closing completely and…
Remedy: The dealer will install a throttle chamber heating kit to prevent icing at no charge to owner.
Model years: 1980
Other Nissan models
- Altima15,472 complaints
- Pathfinder7,355 complaints
- Rogue7,322 complaints
- Maxima6,955 complaints
- Murano5,958 complaints
- Sentra5,954 complaints
- Frontier3,357 complaints
- Versa3,325 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.