Skip to content

Navistar 4800 Recalls & Complaints by Model Year

NHTSA lists 3 safety recalls and 0 owner complaints across 8 model years of the Navistar 4800 (1992–1999).

3
safety recalls, all years
0
owner complaints, all years
1994
year with most recalls

Pick your Navistar 4800 model year

Model yearRecallsComplaints
1999 Navistar 480020
1998 Navistar 480010
1997 Navistar 480010
1996 Navistar 480010
1995 Navistar 480020
1994 Navistar 480020
1993 Navistar 480010
1992 Navistar 480010

All Navistar 4800 recalls (3)

Every NHTSA safety campaign that lists a Navistar 4800, most recent first, with the model years each one covers.

  1. Service brakes, air

    NHTSA 99V351000 Reported 944 vehicles potentially affected INTERNATIONAL TRUCK AND ENGINE

    Vehicle description: heavy duty trucks. There is interference between the air brake s-cam and the end of one of the knuckle studs. As the brake shoe lining wears, the s-cam rotation may be limited by the interfering knuckle stud. If the s-cam can not rotate through its full range of motion, the braking force can not be fully transmitted…

    Remedy: Dealers will shorten the interfering knuckle stud to eliminate the clearance problem.

    Model years: 1994, 1995, 1996, 1997, 1998, 1999

  2. Service brakes, air

    NHTSA 99V055001 Reported 1,547 vehicles potentially affected INTERNATIONAL TRUCK AND ENGINE

    Vehicle description: heavy duty trucks, transit and school buses, equipped with meritor air brake automatic slack adjusters. Some of the automatic slack adjusters had insufficient torque applied to the guide pawl cap screw.

    Remedy: Dealers will check the torque on the automatic slack adjuster guide pawl. If there is no torque, the brakes will be adjusted and the guide pawl will be tightened to 15-20 ft. Lbs.

    Model years: 1999

  3. Arm (steering)

    NHTSA 98V171000 Reported 1,463 vehicles potentially affected INTERNATIONAL TRUCK AND ENGINE

    Vehicle description: heavy duty 4x4 and 6x6 trucks equipped with fabco 12,000 pound front drive axles. The integral tie rod arm of these axles fractures from the spindle yoke.

    Remedy: Owners will be provided with a replacement kit which consists of 2 spindle yokes, a steering adjustment screw, and miscellaneous parts along with installation instructions.

    Model years: 1992, 1993, 1994, 1995

Other Navistar models

Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.