Mitsubishi Precis Recalls & Complaints by Model Year
NHTSA lists 6 safety recalls and 16 owner complaints across 8 model years of the Mitsubishi Precis (1987–1994). The most-complained-about year is 1989.
Pick your Mitsubishi Precis model year
| Model year | Recalls | Complaints |
|---|---|---|
| 1994 Mitsubishi Precis | 1 | 0 |
| 1993 Mitsubishi Precis | 1 | 2 |
| 1992 Mitsubishi Precis | 1 | 1 |
| 1991 Mitsubishi Precis | 1 | 2 |
| 1990 Mitsubishi Precis | 2 | 2 |
| 1989 Mitsubishi Precis | 3 | 5 |
| 1988 Mitsubishi Precis | 3 | 3 |
| 1987 Mitsubishi Precis | 2 | 1 |
What Mitsubishi Precis owners complain about
Across all model years, owners have filed 16 complaints with NHTSA. The 1989 model year has the most, with 5.
All Mitsubishi Precis recalls (6)
Every NHTSA safety campaign that lists a Mitsubishi Precis, most recent first, with the model years each one covers.
-
Heater core (visibility)
Vehicles involved are those that had the heater valve stems replaced in an earlier mitsubishi recall (94v-103.001). Certain vehicles had an incorrect valve stem installed which could cause the incorrect stem to leak after a period of time.
Remedy: Dealers will inspect and replace incorrect valve stems.
-
Heater core (visibility)
The heater control valve stem does not meet the material specifications. High coolant temperatures can cause the stem to leak.
Remedy: Dealers will inspect and replace defective valve stems.
-
Fuel system, gasoline
The vehicles failed the lateral moving barrier impact test requirements of FMVSS 301, "fuel system integrity." the fuel leakage from the gas tank exceeded the maximum allowable amount of spillage.
Remedy: Mitsubishi has developed an appropriate countermeasure that will comply with all requirements of FMVSS 301.
Model years: 1990, 1991, 1992, 1993, 1994
-
Exhaust system (engine and engine cooling)
Deterioration of the reed valve subassembly may lead to a malfunction within the secondary air supply portion of the emission control system. The screws which attach the reeds to the reed valve subassembly may rust, and if the rusting becomes severe, the screw heads will erode and allow the reeds to separate from the reed valve…
Remedy: Replace the reed valve subassembly with one whose metal components are fabricated from corrosion resistant stainless steel.
-
Hubcap/cover (wheels)
Lock washer located under the nut that secures the front hub to the drive shaft may have had improper heat treatment and could crack.
Remedy: Replace lock washer on each front wheel and repair area around lock washer as necessary.
Model years: 1990
-
Pads (service brakes)
Vehicle may fail to conform to the brake fade and recovery portion of FMVSS 105.
Remedy: Replace front brake pads with newly designed semi metallic brake pads.
Model years: 1987
Other Mitsubishi models
- Eclipse2,135 complaints
- Galant1,788 complaints
- Outlander1,322 complaints
- Lancer865 complaints
- Montero783 complaints
- Mirage702 complaints
- Diamante505 complaints
- Outlander Sport476 complaints
Source: NHTSA recall and complaint databases and EPA fuel economy data, October 2026. Complaint counts are owner reports to NHTSA, not verified defects. Recall counts are safety campaigns that list this model year; whether a particular car was already repaired depends on its VIN. How this data is compiled.